Merge branch 'akpm' (patches from Andrew)

Merge fourth patch-bomb from Andrew Morton:

 - sys_membarier syscall

 - seq_file interface changes

 - a few misc fixups

* emailed patches from Andrew Morton <[email protected]>:
  revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
  mm/early_ioremap: add explicit #include of asm/early_ioremap.h
  fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
  selftests: enhance membarrier syscall test
  selftests: add membarrier syscall test
  sys_membarrier(): system-wide memory barrier (generic, x86)
  MODSIGN: fix a compilation warning in extract-cert

MAINTAINERS

@@ -6789,6 +6789,14 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 
+MEMBARRIER SUPPORT
+M:	Mathieu Desnoyers <[email protected]>
+M:	"Paul E. McKenney" <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	kernel/membarrier.c
+F:	include/uapi/linux/membarrier.h
+
 MEMORY MANAGEMENT
 L:	[email protected]
 W:	http://www.linux-mm.org

arch/x86/entry/syscalls/syscall_32.tbl

@@ -381,3 +381,4 @@
 372	i386	recvmsg			sys_recvmsg			compat_sys_recvmsg
 373	i386	shutdown		sys_shutdown
 374	i386	userfaultfd		sys_userfaultfd
+375	i386	membarrier		sys_membarrier

arch/x86/entry/syscalls/syscall_64.tbl

@@ -330,6 +330,7 @@
 321	common	bpf			sys_bpf
 322	64	execveat		stub_execveat
 323	common	userfaultfd		sys_userfaultfd
+324	common	membarrier		sys_membarrier
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact

drivers/iommu/omap-iommu-debug.c

@@ -135,8 +135,9 @@ __dump_tlb_entries(struct omap_iommu *obj, struct cr_regs *crs, int num)
 static ssize_t iotlb_dump_cr(struct omap_iommu *obj, struct cr_regs *cr,
 			     struct seq_file *s)
 {
-	return seq_printf(s, "%08x %08x %01x\n", cr->cam, cr->ram,
+	seq_printf(s, "%08x %08x %01x\n", cr->cam, cr->ram,
 			  (cr->cam & MMU_CAM_P) ? 1 : 0);
+	return 0;
 }
 
 static size_t omap_dump_tlb_entries(struct omap_iommu *obj, struct seq_file *s)

fs/nsfs.c

@@ -142,7 +142,8 @@ static int nsfs_show_path(struct seq_file *seq, struct dentry *dentry)
 	struct inode *inode = d_inode(dentry);
 	const struct proc_ns_operations *ns_ops = dentry->d_fsdata;
 
-	return seq_printf(seq, "%s:[%lu]", ns_ops->name, inode->i_ino);
+	seq_printf(seq, "%s:[%lu]", ns_ops->name, inode->i_ino);
+	return 0;
 }
 
 static const struct super_operations nsfs_ops = {

fs/ocfs2/dlm/dlmrecovery.c

@@ -1776,7 +1776,7 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm,
 				     struct dlm_migratable_lockres *mres)
 {
 	struct dlm_migratable_lock *ml;
-	struct list_head *queue;
+	struct list_head *queue, *iter;
 	struct list_head *tmpq = NULL;
 	struct dlm_lock *newlock = NULL;
 	struct dlm_lockstatus *lksb = NULL;
@@ -1821,7 +1821,9 @@ static int dlm_process_recovery_data(struct dlm_ctxt *dlm,
 			spin_lock(&res->spinlock);
 			for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) {
 				tmpq = dlm_list_idx_to_ptr(res, j);
-				list_for_each_entry(lock, tmpq, list) {
+				list_for_each(iter, tmpq) {
+					lock = list_entry(iter,
+						  struct dlm_lock, list);
 					if (lock->ml.cookie == ml->cookie)
 						break;
 					lock = NULL;

fs/seq_file.c

@@ -372,16 +372,16 @@ EXPORT_SYMBOL(seq_release);
  *	@esc:	set of characters that need escaping
  *
  *	Puts string into buffer, replacing each occurrence of character from
- *	@esc with usual octal escape.  Returns 0 in case of success, -1 - in
- *	case of overflow.
+ *	@esc with usual octal escape.
+ *	Use seq_has_overflowed() to check for errors.
  */
-int seq_escape(struct seq_file *m, const char *s, const char *esc)
+void seq_escape(struct seq_file *m, const char *s, const char *esc)
 {
 	char *end = m->buf + m->size;
-        char *p;
+	char *p;
 	char c;
 
-        for (p = m->buf + m->count; (c = *s) != '\0' && p < end; s++) {
+	for (p = m->buf + m->count; (c = *s) != '\0' && p < end; s++) {
 		if (!strchr(esc, c)) {
 			*p++ = c;
 			continue;
@@ -394,39 +394,34 @@ int seq_escape(struct seq_file *m, const char *s, const char *esc)
 			continue;
 		}
 		seq_set_overflow(m);
-		return -1;
-        }
+		return;
+	}
 	m->count = p - m->buf;
-        return 0;
 }
 EXPORT_SYMBOL(seq_escape);
 
-int seq_vprintf(struct seq_file *m, const char *f, va_list args)
+void seq_vprintf(struct seq_file *m, const char *f, va_list args)
 {
 	int len;
 
 	if (m->count < m->size) {
 		len = vsnprintf(m->buf + m->count, m->size - m->count, f, args);
 		if (m->count + len < m->size) {
 			m->count += len;
-			return 0;
+			return;
 		}
 	}
 	seq_set_overflow(m);
-	return -1;
 }
 EXPORT_SYMBOL(seq_vprintf);
 
-int seq_printf(struct seq_file *m, const char *f, ...)
+void seq_printf(struct seq_file *m, const char *f, ...)
 {
-	int ret;
 	va_list args;
 
 	va_start(args, f);
-	ret = seq_vprintf(m, f, args);
+	seq_vprintf(m, f, args);
 	va_end(args);
-
-	return ret;
 }
 EXPORT_SYMBOL(seq_printf);
 
@@ -664,26 +659,25 @@ int seq_open_private(struct file *filp, const struct seq_operations *ops,
 }
 EXPORT_SYMBOL(seq_open_private);
 
-int seq_putc(struct seq_file *m, char c)
+void seq_putc(struct seq_file *m, char c)
 {
-	if (m->count < m->size) {
-		m->buf[m->count++] = c;
-		return 0;
-	}
-	return -1;
+	if (m->count >= m->size)
+		return;
+
+	m->buf[m->count++] = c;
 }
 EXPORT_SYMBOL(seq_putc);
 
-int seq_puts(struct seq_file *m, const char *s)
+void seq_puts(struct seq_file *m, const char *s)
 {
 	int len = strlen(s);
-	if (m->count + len < m->size) {
-		memcpy(m->buf + m->count, s, len);
-		m->count += len;
-		return 0;
+
+	if (m->count + len >= m->size) {
+		seq_set_overflow(m);
+		return;
 	}
-	seq_set_overflow(m);
-	return -1;
+	memcpy(m->buf + m->count, s, len);
+	m->count += len;
 }
 EXPORT_SYMBOL(seq_puts);
 
@@ -694,8 +688,8 @@ EXPORT_SYMBOL(seq_puts);
  * This routine is very quick when you show lots of numbers.
  * In usual cases, it will be better to use seq_printf(). It's easier to read.
  */
-int seq_put_decimal_ull(struct seq_file *m, char delimiter,
-			unsigned long long num)
+void seq_put_decimal_ull(struct seq_file *m, char delimiter,
+			 unsigned long long num)
 {
 	int len;
 
@@ -707,35 +701,33 @@ int seq_put_decimal_ull(struct seq_file *m, char delimiter,
 
 	if (num < 10) {
 		m->buf[m->count++] = num + '0';
-		return 0;
+		return;
 	}
 
 	len = num_to_str(m->buf + m->count, m->size - m->count, num);
 	if (!len)
 		goto overflow;
 	m->count += len;
-	return 0;
+	return;
+
 overflow:
 	seq_set_overflow(m);
-	return -1;
 }
 EXPORT_SYMBOL(seq_put_decimal_ull);
 
-int seq_put_decimal_ll(struct seq_file *m, char delimiter,
-			long long num)
+void seq_put_decimal_ll(struct seq_file *m, char delimiter, long long num)
 {
 	if (num < 0) {
 		if (m->count + 3 >= m->size) {
 			seq_set_overflow(m);
-			return -1;
+			return;
 		}
 		if (delimiter)
 			m->buf[m->count++] = delimiter;
 		num = -num;
 		delimiter = '-';
 	}
-	return seq_put_decimal_ull(m, delimiter, num);
-
+	seq_put_decimal_ull(m, delimiter, num);
 }
 EXPORT_SYMBOL(seq_put_decimal_ll);
 

include/linux/seq_file.h

@@ -114,13 +114,18 @@ int seq_open(struct file *, const struct seq_operations *);
 ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
 loff_t seq_lseek(struct file *, loff_t, int);
 int seq_release(struct inode *, struct file *);
-int seq_escape(struct seq_file *, const char *, const char *);
-int seq_putc(struct seq_file *m, char c);
-int seq_puts(struct seq_file *m, const char *s);
 int seq_write(struct seq_file *seq, const void *data, size_t len);
 
-__printf(2, 3) int seq_printf(struct seq_file *, const char *, ...);
-__printf(2, 0) int seq_vprintf(struct seq_file *, const char *, va_list args);
+__printf(2, 0)
+void seq_vprintf(struct seq_file *m, const char *fmt, va_list args);
+__printf(2, 3)
+void seq_printf(struct seq_file *m, const char *fmt, ...);
+void seq_putc(struct seq_file *m, char c);
+void seq_puts(struct seq_file *m, const char *s);
+void seq_put_decimal_ull(struct seq_file *m, char delimiter,
+			 unsigned long long num);
+void seq_put_decimal_ll(struct seq_file *m, char delimiter, long long num);
+void seq_escape(struct seq_file *m, const char *s, const char *esc);
 
 void seq_hex_dump(struct seq_file *m, const char *prefix_str, int prefix_type,
 		  int rowsize, int groupsize, const void *buf, size_t len,
@@ -138,10 +143,6 @@ int single_release(struct inode *, struct file *);
 void *__seq_open_private(struct file *, const struct seq_operations *, int);
 int seq_open_private(struct file *, const struct seq_operations *, int);
 int seq_release_private(struct inode *, struct file *);
-int seq_put_decimal_ull(struct seq_file *m, char delimiter,
-			unsigned long long num);
-int seq_put_decimal_ll(struct seq_file *m, char delimiter,
-			long long num);
 
 static inline struct user_namespace *seq_user_ns(struct seq_file *seq)
 {

include/linux/syscalls.h

@@ -885,4 +885,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
 			const char __user *const __user *argv,
 			const char __user *const __user *envp, int flags);
 
+asmlinkage long sys_membarrier(int cmd, int flags);
+
 #endif

include/uapi/asm-generic/unistd.h

@@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
 __SYSCALL(__NR_bpf, sys_bpf)
 #define __NR_execveat 281
 __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
+#define __NR_membarrier 282
+__SYSCALL(__NR_membarrier, sys_membarrier)
 
 #undef __NR_syscalls
-#define __NR_syscalls 282
+#define __NR_syscalls 283
 
 /*
  * All syscalls below here should go away really,

include/uapi/linux/Kbuild

@@ -252,6 +252,7 @@ header-y += mdio.h
 header-y += media.h
 header-y += media-bus-format.h
 header-y += mei.h
+header-y += membarrier.h
 header-y += memfd.h
 header-y += mempolicy.h
 header-y += meye.h

include/uapi/linux/membarrier.h

@@ -0,0 +1,53 @@
+#ifndef _UAPI_LINUX_MEMBARRIER_H
+#define _UAPI_LINUX_MEMBARRIER_H
+
+/*
+ * linux/membarrier.h
+ *
+ * membarrier system call API
+ *
+ * Copyright (c) 2010, 2015 Mathieu Desnoyers <[email protected]>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/**
+ * enum membarrier_cmd - membarrier system call command
+ * @MEMBARRIER_CMD_QUERY:   Query the set of supported commands. It returns
+ *                          a bitmask of valid commands.
+ * @MEMBARRIER_CMD_SHARED:  Execute a memory barrier on all running threads.
+ *                          Upon return from system call, the caller thread
+ *                          is ensured that all running threads have passed
+ *                          through a state where all memory accesses to
+ *                          user-space addresses match program order between
+ *                          entry to and return from the system call
+ *                          (non-running threads are de facto in such a
+ *                          state). This covers threads from all processes
+ *                          running on the system. This command returns 0.
+ *
+ * Command to be passed to the membarrier system call. The commands need to
+ * be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to
+ * the value 0.
+ */
+enum membarrier_cmd {
+	MEMBARRIER_CMD_QUERY = 0,
+	MEMBARRIER_CMD_SHARED = (1 << 0),
+};
+
+#endif /* _UAPI_LINUX_MEMBARRIER_H */

init/Kconfig

@@ -1602,6 +1602,18 @@ config PCI_QUIRKS
 	  bugs/quirks. Disable this only if your target machine is
 	  unaffected by PCI quirks.
 
+config MEMBARRIER
+	bool "Enable membarrier() system call" if EXPERT
+	default y
+	help
+	  Enable the membarrier() system call that allows issuing memory
+	  barriers across all running threads, which can be used to distribute
+	  the cost of user-space memory barriers asymmetrically by transforming
+	  pairs of memory barriers into pairs consisting of membarrier() and a
+	  compiler barrier.
+
+	  If unsure, say Y.
+
 config EMBEDDED
 	bool "Embedded system"
 	option allnoconfig_y

kernel/Makefile

@@ -100,6 +100,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
 obj-$(CONFIG_JUMP_LABEL) += jump_label.o
 obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
 obj-$(CONFIG_TORTURE_TEST) += torture.o
+obj-$(CONFIG_MEMBARRIER) += membarrier.o
 
 obj-$(CONFIG_HAS_IOMEM) += memremap.o