Redirect printf() to USB Virtual COM Port on STM32H7 MCU

Enable printf() function to work with USB Virtual COM Port (STM32H743ZI)

STM32CubeMX

1. Turn on USB_OTG_FS with mode Device_Only
2. In the Middleware turn on USB_DEVICE with class Communication Device Class (Virtual Com Port)
3. Default settings
4. Generate Code

main.c

1. #include <stdio.h>
2. Add code below between /* USER CODE BEGIN 4 */

int _write(int file, char *ptr, int len) { 
    CDC_Transmit_FS((uint8_t*) ptr, len); return len; 
}

For cpp project:

extern "C" int _write(int file, char *ptr, int len) { 
    CDC_Transmit_FS((uint8_t*) ptr, len); return len; 
}

That's it! Now you can use printf() anywere you want.

NOTICE! When I started to using FreeRTOS I've noticed that printf displays an incorrect value. Digging a bit, I found out that if you are enable the delay after CDC_Transmit_FS(), then everything works fine, so:

int _write(int file, char *ptr, int len) { 
    CDC_Transmit_FS((uint8_t*) ptr, len); 
    osDelay(1);
    return len; 
}

work's for me!