Update auto-generated docs and translations (#20210)

translations/de.json

@@ -412,6 +412,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "Istio benötigt {{.minCPUs}} CPUs -- Ihre Konfiguration reserviert nur {{.cpus}} CPUs",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "Istio benötigt {{.minMem}}MB Speicher -- Ihre Konfiguration reserviert nur {{.memory}}MB",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "Es scheint, dass Sie GCE verwenden, was bedeutet, dass Authentifizierung auch ohne die GCP Auth Addons funktionieren sollte. Wenn Sie dennoch mittels Credential-Datei authentifizieren möchten, verwenden Sie --force.",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "Die Kicbase Images wurden nicht gelöscht. Um sie zu löschen, starten Sie:",
 	"Kill the mount process spawned by minikube start": "Töte den Mount-Prozess, der durch minikube start gestartet wurde",
 	"Kubernetes requires at least 2 CPU's to start": "Kubernetes benötigt mindestens 2 CPU's um zu starten",
@@ -1077,6 +1078,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "maximale Zeit die gewartet werden soll, bis Kubernetes oder der Host als funktional angesehen soll.",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "Minikube unterstützt den BTRFS Storage Treiber noch nicht, aber es existiert eine Workaround, fügen Sie folgenden Flag zu Ihrem Start-Befehl hinzu `--feature-gates=\"LocalStorageCapacityIsolation=false\"`",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\\\"LocalStorageCapacityIsolation=false\\\"`": "minikube unterstützt den BTRFS Storage Treiber nicht, es gibt einen Workaround, füge den folgenden Paramater zum Start-Befehl hinzu `--feature-gates=\\\"LocalStorageCapacityIsolation=false\\\"`",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "Minikube fehlen die Dateien, die für die Gast-Umgebung erforderlich sind. Dies kann durch Ausführen von 'minikube delete' repariert werden",
@@ -1163,6 +1165,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "{{.driver_name}} verfügt über weniger als 2 CPUs, aber Kubernetes benötigt mindestens 2 verfügbare CPUs",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "{{.driver_name}} hat nur {{.container_limit}}MB Speicher aber spezifiziert wurden {{.specified_memory}}MB",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "{{.driver}} hat nur {{.size}}MiB verfügbar, weniger als die für Kubernetes notwendigen {{.req}}MiB",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} doesn't have images.": "{{.name}} hat keine Images.",
 	"{{.name}} has following images:": "{{.name}} hat die folgenden Images:",
 	"{{.name}} has no available configuration options": "{{.name}} hat keine verfügbaren Konfigurations-Optionen",

translations/es.json

@@ -409,6 +409,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "",
 	"Kill the mount process spawned by minikube start": "",
 	"Kubernetes requires at least 2 CPU's to start": "",
@@ -1034,6 +1035,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "",
 	"minikube is not meant for production use. You are opening non-local traffic": "",
@@ -1117,6 +1119,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} doesn't have images.": "",
 	"{{.name}} has no available configuration options": "",
 	"{{.name}} has the following images:": "",

translations/fr.json

@@ -406,6 +406,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "Istio a besoin de {{.minCPUs}} processeurs -- votre configuration n'alloue que {{.cpus}} processeurs",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "Istio a besoin de {{.minMem}}Mo de mémoire -- votre configuration n'alloue que {{.memory}}Mo",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "Il semble que vous exécutiez GCE, ce qui signifie que l'authentification devrait fonctionner sans le module GCP Auth. Si vous souhaitez toujours vous authentifier à l'aide d'un fichier d'informations d'identification, utilisez l'indicateur --force.",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "Les images Kicbase n'ont pas été supprimées. Pour supprimer des images, exécutez :",
 	"Kill the mount process spawned by minikube start": "Tuez le processus de montage généré par le démarrage de minikube",
 	"Kubernetes requires at least 2 CPU's to start": "Kubernetes nécessite au moins 2 processeurs pour démarrer",
@@ -1061,6 +1062,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "temps d'attente maximal par Kubernetes ou hôte pour être en bonne santé.",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "minikube ne prend pas encore en charge le pilote de stockage BTRFS, il existe une solution de contournement, ajoutez l'indicateur suivant à votre commande de démarrage `--feature-gates=\"LocalStorageCapacityIsolation=false\"`",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "minikube manque des fichiers relatifs à votre environnement invité. Cela peut être corrigé en exécutant 'minikube delete'",
 	"minikube is not meant for production use. You are opening non-local traffic": "minikube n'est pas destiné à une utilisation en production. Vous ouvrez du trafic non local",
@@ -1151,6 +1153,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "{{.driver_name}} dispose de moins de 2 processeurs disponibles, mais Kubernetes nécessite au moins 2 procésseurs pour fonctionner",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "{{.driver_name}} ne dispose que de {{.container_limit}}Mo de mémoire, mais vous avez spécifié {{.specified_memory}}Mo",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "{{.driver}} ne dispose que de {{.size}}Mio disponible, moins que les {{.req}}Mio requis pour Kubernetes",
+	"{{.env}}={{.value}}": "",
 	"{{.err}}": "{{.err}}",
 	"{{.extra_option_component_name}}.{{.key}}={{.value}}": "{{.extra_option_component_name}}.{{.key}}={{.value}}",
 	"{{.name}} doesn't have images.": "{{.name}} n'a pas d'images.",

translations/ja.json

@@ -388,6 +388,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "Istio は {{.minCPUs}} 個の CPU を必要とします -- あなたの設定では {{.cpus}} 個の CPU しか割り当てていません",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "Istio は {{.minMem}}MB のメモリーを必要とします -- あなたの設定では、{{.memory}}MB しか割り当てていません",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "GCE 上で実行しているようですが、これは GCP Auth アドオンなしに認証が機能すべきであることになります。それでもクレデンシャルファイルを使用した認証を希望するのであれば、--force フラグを使用してください。",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "Kicbase イメージが削除されていません。次のコマンドでイメージを削除します:",
 	"Kill the mount process spawned by minikube start": "minikube start によって実行されたマウントプロセスを強制停止します",
 	"Kubernetes requires at least 2 CPU's to start": "Kubernetes は起動に少なくとも 2 個の CPU が必要です",
@@ -1011,6 +1012,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "Kubernetes またはホストが正常稼働するまでの最大待機時間",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "minikube addons list --output OUTPUT. json, list",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "minikube はまだ BTRFS ストレージドライバーに対応していませんが、回避策があります。次のフラグを start コマンドに追加してください: `--feature-gates=\"LocalStorageCapacityIsolation=false\"` ",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "minikube はあなたのゲスト環境に関連するファイルを見失いました。これは 'minikube delete' を実行することで修正できます",
 	"minikube is not meant for production use. You are opening non-local traffic": "minikube は本番適用を意図されたものではありません。あなたは非ローカルのトラフィックを開こうとしています",
@@ -1098,6 +1100,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "{{.driver_name}} で利用できる CPU が 2 個未満ですが、Kubernetes を使用するには 2 個以上の CPU が必要です",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "{{.driver_name}} は {{.container_limit}}MB のメモリーしか使用できませんが、{{.specified_memory}}MB のメモリー使用を指定されました",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "{{.driver}} は Kubernetes に必要な {{.req}}MiB 未満の {{.size}}MiB しか使用できません",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} doesn't have images.": "{{.name}} はイメージがありません。",
 	"{{.name}} has following images:": "{{.name}} は次のイメージがあります:",
 	"{{.name}} has no available configuration options": "{{.name}} には利用可能な設定オプションがありません",

translations/ko.json

@@ -424,6 +424,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "",
 	"Kill the mount process spawned by minikube start": "",
 	"Kubernetes requires at least 2 CPU's to start": "",
@@ -1049,6 +1050,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "",
 	"minikube is not meant for production use. You are opening non-local traffic": "",
@@ -1134,6 +1136,7 @@
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "",
 	"{{.driver}} does not appear to be installed": "{{.driver}} 가 설치되지 않았습니다",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} cluster does not exist": "{{.name}} 클러스터가 존재하지 않습니다",
 	"{{.name}} doesn't have images.": "{{.name}} 이미지가 없습니다.",
 	"{{.name}} has following images:": "{{.name}}에는 다음과 같은 이미지가 있습니다.",

translations/pl.json

@@ -408,6 +408,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "",
 	"Kill the mount process spawned by minikube start": "",
 	"Kubernetes requires at least 2 CPU's to start": "",
@@ -1045,6 +1046,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "",
 	"minikube is not meant for production use. You are opening non-local traffic": "minikube nie jest przeznaczony do użycia w środowisku produkcyjnym. Otwierasz klaster na ruch nielokalny",
@@ -1129,6 +1131,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "sterownik {{.driver}} ma tylko {{.size}}MiB dostępnej przestrzeni dyskowej, to mniej niż wymagane {{.req}}MiB dla Kubernetesa",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} cluster does not exist": "Klaster {{.name}} nie istnieje",
 	"{{.name}} doesn't have images.": "{{.name}} nie ma obrazów.",
 	"{{.name}} has following images:": "{{.name}} ma następujące obrazy:",

translations/ru.json

@@ -371,6 +371,7 @@
 	"Istio needs {{.minCPUs}} CPUs -- your configuration only allocates {{.cpus}} CPUs": "",
 	"Istio needs {{.minMem}}MB of memory -- your configuration only allocates {{.memory}}MB": "",
 	"It seems that you are running in GCE, which means authentication should work without the GCP Auth addon. If you would still like to authenticate using a credentials file, use the --force flag.": "",
+	"It's very likely that you have an internet issue. Please ensure that you can access the internet at least via HTTP, directly or with proxy. Currently your proxy configure is:": "",
 	"Kicbase images have not been deleted. To delete images run:": "",
 	"Kill the mount process spawned by minikube start": "",
 	"Kubernetes requires at least 2 CPU's to start": "",
@@ -963,6 +964,7 @@
 	"max time to wait per Kubernetes or host to be healthy.": "",
 	"minikube addons images ADDON_NAME --output OUTPUT. table, json": "",
 	"minikube addons list --output OUTPUT. json, list": "",
+	"minikube cannot pull kicbase image from any docker registry, and is trying to download kicbase tarball from github release page via HTTP.": "",
 	"minikube does not support the BTRFS storage driver yet, there is a workaround, add the following flag to your start command `--feature-gates=\"LocalStorageCapacityIsolation=false\"`": "",
 	"minikube is missing files relating to your guest environment. This can be fixed by running 'minikube delete'": "",
 	"minikube is not meant for production use. You are opening non-local traffic": "",
@@ -1045,6 +1047,7 @@
 	"{{.driver_name}} has less than 2 CPUs available, but Kubernetes requires at least 2 to be available": "",
 	"{{.driver_name}} has only {{.container_limit}}MB memory but you specified {{.specified_memory}}MB": "",
 	"{{.driver}} only has {{.size}}MiB available, less than the required {{.req}}MiB for Kubernetes": "",
+	"{{.env}}={{.value}}": "",
 	"{{.name}} doesn't have images.": "",
 	"{{.name}} has no available configuration options": "",
 	"{{.name}} has the following images:": "",