Add I/Q view

data/ui/signal_frame.ui

@@ -84,7 +84,7 @@
         </font>
        </property>
        <property name="text">
-        <string>Signal View:</string>
+        <string>Signal view:</string>
        </property>
       </widget>
      </item>
@@ -282,7 +282,7 @@
         <string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;For &lt;span style=&quot; font-weight:600;&quot;&gt;higher order&lt;/span&gt; modulations (&amp;gt; 1 Bits/Symbol), there are &lt;span style=&quot; font-weight:600;&quot;&gt;multiple&lt;/span&gt; centers. We assume that the &lt;span style=&quot; font-weight:600;&quot;&gt;spacing&lt;/span&gt; between all possible symbols is &lt;span style=&quot; font-weight:600;&quot;&gt;constant&lt;/span&gt;. Therefore you configure the spacing between centers.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
        </property>
        <property name="text">
-        <string>Center Spacing:</string>
+        <string>Center spacing:</string>
        </property>
       </widget>
      </item>
@@ -351,7 +351,7 @@
         <string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;This is the error tolerance for determining the &lt;span style=&quot; font-weight:600;&quot;&gt;pulse lengths&lt;/span&gt; in the demodulated signal.&lt;/p&gt;&lt;p&gt;&lt;span style=&quot; font-weight:400; font-style:italic;&quot;&gt;Example:&lt;/span&gt; Say, we are reading a ones pulse and the tolerance value was set to 5. Then 5 errors (which must follow sequentially) are accepted.&lt;/p&gt;&lt;p&gt;Tune this value if you have &lt;span style=&quot; font-weight:600;&quot;&gt;spiky data&lt;/span&gt; after demodulation.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
        </property>
        <property name="text">
-        <string>Error Tolerance:</string>
+        <string>Error tolerance:</string>
        </property>
       </widget>
      </item>
@@ -405,7 +405,7 @@
         </sizepolicy>
        </property>
        <property name="toolTip">
-        <string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Choose the view of your signal. Analog, Demodulated or Spectrogram.&lt;/p&gt;&lt;p&gt;The quadrature demodulation uses a &lt;span style=&quot; font-weight:600;&quot;&gt;threshold of magnitudes,&lt;/span&gt; to &lt;span style=&quot; font-weight:600;&quot;&gt;suppress noise&lt;/span&gt;. All samples with a magnitude lower than this threshold will be eliminated after demodulation.&lt;/p&gt;&lt;p&gt;Tune this value by selecting a &lt;span style=&quot; font-style:italic;&quot;&gt;noisy area&lt;/span&gt; and mark it as noise using &lt;span style=&quot; font-weight:600;&quot;&gt;context menu&lt;/span&gt;.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
+        <string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Choose the view of your signal. Analog, Demodulated, Spectrogram or I/Q view.&lt;/p&gt;&lt;p&gt;The quadrature demodulation uses a &lt;span style=&quot; font-weight:600;&quot;&gt;threshold of magnitudes,&lt;/span&gt; to &lt;span style=&quot; font-weight:600;&quot;&gt;suppress noise&lt;/span&gt;. All samples with a magnitude lower than this threshold will be eliminated after demodulation.&lt;/p&gt;&lt;p&gt;Tune this value by selecting a &lt;span style=&quot; font-style:italic;&quot;&gt;noisy area&lt;/span&gt; and mark it as noise using &lt;span style=&quot; font-weight:600;&quot;&gt;context menu&lt;/span&gt;.&lt;/p&gt;&lt;p&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Signal colors&lt;/span&gt;:&lt;br/&gt;I =&amp;gt; &lt;span style=&quot; font-weight:600; color:#3232e1;&quot;&gt;blue&lt;/span&gt;&lt;br/&gt;Q =&amp;gt; &lt;span style=&quot; font-weight:600;&quot;&gt;black&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
        </property>
        <item>
         <property name="text">
@@ -422,6 +422,11 @@
          <string>Spectrogram</string>
         </property>
        </item>
+       <item>
+        <property name="text">
+         <string>I/Q view</string>
+        </property>
+       </item>
       </widget>
      </item>
      <item row="2" column="1">
@@ -545,7 +550,7 @@
         <string>If this is set to true, your selected protocol bits will show up in the signal view, and vice versa.</string>
        </property>
        <property name="text">
-        <string>Sync Selection</string>
+        <string>Sync selection</string>
        </property>
        <property name="checked">
         <bool>true</bool>
@@ -574,7 +579,7 @@
 If you want your protocol to be better separated, edit the PauseLen using right-click menu from a selection in SignalView or ProtocolView.</string>
        </property>
        <property name="text">
-        <string>Show Signal as</string>
+        <string>Show data as</string>
        </property>
       </widget>
      </item>
@@ -660,7 +665,7 @@ If you want your protocol to be better separated, edit the PauseLen using right-
      <item row="20" column="0">
       <widget class="QLabel" name="labelFFTWindowSize">
        <property name="text">
-        <string>FFT Window Size:</string>
+        <string>FFT window size:</string>
        </property>
       </widget>
      </item>

src/urh/controller/widgets/SignalFrame.py

@@ -685,8 +685,8 @@ def on_noise_threshold_changed(self):
         self.ui.spinBoxNoiseTreshold.setValue(self.signal.noise_threshold_relative)
         minimum = self.signal.noise_min_plot
         maximum = self.signal.noise_max_plot
-        if self.ui.cbSignalView.currentIndex() == 0:
-            # Draw Noise only in Analog View
+        if self.ui.cbSignalView.currentIndex() == 0 or self.ui.cbSignalView.currentIndex() == 3:
+            # Draw Noise only in analog and I/Q view
             self.ui.gvSignal.scene().draw_noise_area(minimum, maximum - minimum)
 
     @pyqtSlot(int)

src/urh/settings.py

@@ -42,6 +42,8 @@ def get_qt_settings_filename():
 TRANSPARENT_COLOR = QColor(Qt.transparent)
 
 LINECOLOR = QColor.fromRgb(225, 225, 225)
+LINECOLOR_I = QColor.fromRgb(50, 50, 225)
+LINECOLOR_Q = QColor.fromRgb(55, 53, 53)
 BGCOLOR = QColor.fromRgb(55, 53, 53)
 AXISCOLOR = QColor.fromRgb(200, 200, 200, 100)
 ARROWCOLOR = QColor.fromRgb(204, 120, 50)

src/urh/signalprocessing/Signal.py

@@ -379,6 +379,13 @@ def real_plot_data(self):
         except AttributeError:
             return np.zeros(0, dtype=np.float32)
 
+    @property
+    def imag_plot_data(self):
+        try:
+            return self.iq_array.imag
+        except AttributeError:
+            return np.zeros(0, dtype=np.float32)
+
     @property
     def changed(self) -> bool:
         """

src/urh/ui/painting/SceneManager.py

@@ -28,11 +28,12 @@ def plot_data(self, value):
 
     @property
     def num_samples(self):
+        if isinstance(self.plot_data, list):
+            return len(self.plot_data[0])
         return len(self.plot_data)
 
     def show_scene_section(self, x1: float, x2: float, subpath_ranges=None, colors=None):
         """
-
         :param x1: start of section to show
         :param x2: end of section to show
         :param subpath_ranges: for coloring subpaths
@@ -44,12 +45,21 @@ def show_scene_section(self, x1: float, x2: float, subpath_ranges=None, colors=N
         start, end = self.__limit_value(x1), self.__limit_value(x2)
 
         if end > start:
-            paths = path_creator.create_path(self.plot_data, start=start, end=end,
-                                             subpath_ranges=subpath_ranges)
-            self.set_path(paths, colors=colors)
-
-    def set_path(self, paths: list, colors=None):
-        self.clear_path()
+            if isinstance(self.plot_data, list):
+                paths_i = path_creator.create_path(self.plot_data[0], start=start, end=end,
+                                            subpath_ranges=subpath_ranges)
+                paths_q = path_creator.create_path(self.plot_data[1], start=start, end=end,
+                                            subpath_ranges=subpath_ranges)
+                self.set_path(paths_i, colors=[settings.LINECOLOR_I] * len(paths_i))
+                self.set_path(paths_q, colors=[settings.LINECOLOR_Q] * len(paths_q), run_clear_path=False)
+            else:
+                paths = path_creator.create_path(self.plot_data, start=start, end=end,
+                                            subpath_ranges=subpath_ranges)
+                self.set_path(paths, colors=colors)
+
+    def set_path(self, paths: list, colors=None, run_clear_path=True):
+        if run_clear_path:
+            self.clear_path()
         colors = [settings.LINECOLOR] * len(paths) if colors is None else colors
         assert len(paths) == len(colors)
         for path, color in zip(paths, colors):
@@ -67,7 +77,10 @@ def init_scene(self):
         if self.num_samples == 0:
             return
 
-        minimum, maximum = IQArray.min_max_for_dtype(self.plot_data.dtype)
+        if isinstance(self.plot_data, list):
+            minimum, maximum = IQArray.min_max_for_dtype(self.plot_data[0].dtype)
+        else:
+            minimum, maximum = IQArray.min_max_for_dtype(self.plot_data.dtype)
         self.scene.setSceneRect(0, minimum, self.num_samples, maximum - minimum)
         self.scene.setBackgroundBrush(settings.BGCOLOR)
 

src/urh/ui/painting/SignalSceneManager.py

@@ -8,17 +8,24 @@ class SignalSceneManager(SceneManager):
     def __init__(self, signal: Signal, parent):
         super().__init__(parent)
         self.signal = signal
-        self.scene_type = 0  # 0 = Analog Signal, 1 = QuadDemodView
+        self.scene_type = 0  # 0 = Analog Signal, 1 = QuadDemodView, 2 = Spectogram, 3 = I/Q view
         self.mod_type = "ASK"
 
     def show_scene_section(self, x1: float, x2: float, subpath_ranges=None, colors=None):
-        self.plot_data = self.signal.real_plot_data if self.scene_type == 0 else self.signal.qad
+        if self.scene_type == 0:
+            self.plot_data = self.signal.real_plot_data
+        elif self.scene_type == 3:
+            self.plot_data = [self.signal.imag_plot_data, self.signal.real_plot_data]
+        else:
+            self.plot_data = self.signal.qad
         super().show_scene_section(x1, x2, subpath_ranges=subpath_ranges, colors=colors)
 
     def init_scene(self):
         if self.scene_type == 0:
             # Ensure real plot has same y Axis
             self.plot_data = self.signal.real_plot_data
+        elif self.scene_type == 3:
+            self.plot_data = [self.signal.imag_plot_data, self.signal.real_plot_data]
         else:
             self.plot_data = self.signal.qad
 
@@ -28,7 +35,7 @@ def init_scene(self):
 
         self.line_item.setLine(0, 0, 0, 0)  # Hide Axis
 
-        if self.scene_type == 0:
+        if self.scene_type == 0 or self.scene_type == 3:
             self.scene.draw_noise_area(self.signal.noise_min_plot, self.signal.noise_max_plot - self.signal.noise_min_plot)
         else:
             self.scene.draw_sep_area(-self.signal.center_thresholds)