PineTab2: Add support for PINE64 PineTab 2

Makefile

@@ -1,4 +1,4 @@
-BOARDS ?= QUARTZ64 SOQUARTZ ROC-RK3566-PC ROC-RK3568-PC ORANGEPI3B
+BOARDS ?= QUARTZ64 SOQUARTZ ROC-RK3566-PC ROC-RK3568-PC ORANGEPI3B PINETAB2
 TARGET ?= RELEASE
 
 .PHONY: all

build.sh

@@ -106,6 +106,10 @@ for board in ${RKUEFIBOARDS}; do
 		build_uefi OrangePi OrangePi3B
 		build_fit OrangePi3B rk3566-orangepi-3b
 		;;
+	PINETAB2)
+		build_uefi Pine64 PineTab2
+		build_fit PineTab2 rk3566-pinetab2
+		;;
 	*)
 		echo "Unknown board ${board}"
 		exit 1

edk2-rockchip/Platform/Pine64/PineTab2/Drivers/BoardInitDxe/BoardInitDxe.c

@@ -0,0 +1,189 @@
+/** @file
+ *
+ *  Board init for the PineTab2 platform
+ *
+ *  Copyright (c) 2021, Jared McNeill <[email protected]>
+ *  Copyright (c) 2023, Dang Huynh <[email protected]>
+ *
+ *  SPDX-License-Identifier: BSD-2-Clause-Patent
+ *
+ **/
+
+#include <Base.h>
+#include <Library/ArmLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PrintLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/CruLib.h>
+#include <Library/GpioLib.h>
+#include <Library/I2cLib.h>
+#include <Library/MultiPhyLib.h>
+#include <Library/OtpLib.h>
+#include <Library/SocLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/BaseCryptLib.h>
+
+#include <IndustryStandard/Rk356x.h>
+#include <IndustryStandard/Rk356xCru.h>
+#include <ConfigVars.h>
+
+/*
+ * PMIC registers
+*/
+#define PMIC_I2C_ADDR           0x20
+
+#define PMIC_CHIP_NAME          0xed
+#define PMIC_CHIP_VER           0xee
+#define PMIC_POWER_EN1          0xb2
+#define PMIC_POWER_EN2          0xb3
+#define PMIC_POWER_EN3          0xb4
+#define PMIC_LDO1_ON_VSEL       0xcc
+#define PMIC_LDO2_ON_VSEL       0xce
+#define PMIC_LDO3_ON_VSEL       0xd0
+#define PMIC_LDO4_ON_VSEL       0xd2
+#define PMIC_LDO6_ON_VSEL       0xd6
+#define PMIC_LDO7_ON_VSEL       0xd8
+#define PMIC_LDO8_ON_VSEL       0xda
+#define PMIC_LDO9_ON_VSEL       0xdc
+
+/*
+ * CPU_GRF registers
+*/
+#define GRF_CPU_COREPVTPLL_CON0               (CPU_GRF + 0x0010)
+#define  CORE_PVTPLL_RING_LENGTH_SEL_SHIFT    3
+#define  CORE_PVTPLL_RING_LENGTH_SEL_MASK     (0x1FU << CORE_PVTPLL_RING_LENGTH_SEL_SHIFT)
+#define  CORE_PVTPLL_OSC_EN                   BIT1
+#define  CORE_PVTPLL_START                    BIT0
+
+/*
+ * PMU registers
+ */
+#define PMU_NOC_AUTO_CON0                     (PMU_BASE + 0x0070)
+#define PMU_NOC_AUTO_CON1                     (PMU_BASE + 0x0074)
+
+STATIC
+EFI_STATUS
+PmicRead (
+  IN UINT8 Register,
+  OUT UINT8 *Value
+  )
+{
+  return I2cRead (I2C0_BASE, PMIC_I2C_ADDR,
+                  &Register, sizeof (Register),
+                  Value, sizeof (*Value));
+}
+
+STATIC
+EFI_STATUS
+PmicWrite (
+  IN UINT8 Register,
+  IN UINT8 Value
+  )
+{
+  return I2cWrite (I2C0_BASE, PMIC_I2C_ADDR,
+                  &Register, sizeof (Register),
+                  &Value, sizeof (Value));
+}
+
+STATIC
+VOID
+BoardInitPmic (
+  VOID
+  )
+{
+  EFI_STATUS Status;
+  UINT16 ChipName;
+  UINT8 ChipVer;
+  UINT8 Value;
+
+  DEBUG ((DEBUG_INFO, "BOARD: PMIC init\n"));
+
+  GpioPinSetPull (0, GPIO_PIN_PB1, GPIO_PIN_PULL_NONE);
+  GpioPinSetInput (0, GPIO_PIN_PB1, GPIO_PIN_INPUT_SCHMITT);
+  GpioPinSetFunction (0, GPIO_PIN_PB1, 1);
+  GpioPinSetPull (0, GPIO_PIN_PB2, GPIO_PIN_PULL_NONE);
+  GpioPinSetInput (0, GPIO_PIN_PB2, GPIO_PIN_INPUT_SCHMITT);
+  GpioPinSetFunction (0, GPIO_PIN_PB2, 1);
+
+  Status = PmicRead (PMIC_CHIP_NAME, &Value);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_WARN, "Failed to read PMIC chip name! %r\n", Status));
+    ASSERT (FALSE);
+  }
+  ChipName = (UINT16)Value << 4;
+
+  Status = PmicRead (PMIC_CHIP_VER, &Value);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_WARN, "Failed to read PMIC chip version! %r\n", Status));
+    ASSERT (FALSE);
+  }
+  ChipName |= (Value >> 4) & 0xF;
+  ChipVer = Value & 0xF;
+
+  DEBUG ((DEBUG_INFO, "PMIC: Detected RK%03X ver 0x%X\n", ChipName, ChipVer));
+  ASSERT (ChipName == 0x817);
+
+  /* Initialize PMIC */
+  PmicWrite (PMIC_LDO1_ON_VSEL, 0x30);  /* 1.8V - vcca1v8_pmu */
+  PmicWrite (PMIC_LDO2_ON_VSEL, 0x0c);  /* 0.9V - vdda_0v9 */
+  PmicWrite (PMIC_LDO3_ON_VSEL, 0x0c);  /* 0.9V - vdd0v9_pmu */
+  PmicWrite (PMIC_LDO4_ON_VSEL, 0x6c);  /* 3.3V - vccio_acodec */
+  /* Skip LDO5 for now; 1.8V/3.3V - vccio_sd */
+  PmicWrite (PMIC_LDO6_ON_VSEL, 0x6c);  /* 3.3V - vcc3v3_pmu */
+  PmicWrite (PMIC_LDO7_ON_VSEL, 0x30);  /* 1.8V - vcca_1v8 */
+  PmicWrite (PMIC_LDO8_ON_VSEL, 0x30);  /* 1.8V - vcca1v8_dvp */
+  PmicWrite (PMIC_LDO9_ON_VSEL, 0x58);  /* 2.8V - vcca2v8_dvp */
+
+  PmicWrite (PMIC_POWER_EN1, 0xff); /* LDO1, LDO2, LDO3, LDO4 */
+  PmicWrite (PMIC_POWER_EN2, 0xee); /* LDO6, LDO7, LDO8 */
+  PmicWrite (PMIC_POWER_EN3, 0x33); /* LDO9, BOOST */
+}
+
+EFI_STATUS
+EFIAPI
+BoardInitDriverEntryPoint (
+  IN EFI_HANDLE        ImageHandle,
+  IN EFI_SYSTEM_TABLE  *SystemTable
+  )
+{
+  DEBUG ((DEBUG_INFO, "BOARD: BoardInitDriverEntryPoint() called\n"));
+
+  SocSetDomainVoltage (PMUIO2, VCC_1V8);  /* VCCA1V8_PMU */
+  SocSetDomainVoltage (VCCIO1, VCC_3V3);  /* VCCIO_ACODEC (PCIe) */
+  SocSetDomainVoltage (VCCIO2, VCC_1V8);  /* VCCIO_FLASH */
+  SocSetDomainVoltage (VCCIO3, VCC_3V3);  /* VCCIO_SD */
+  SocSetDomainVoltage (VCCIO4, VCC_1V8);
+  SocSetDomainVoltage (VCCIO5, VCC_1V8);
+  SocSetDomainVoltage (VCCIO6, VCC_1V8);
+  SocSetDomainVoltage (VCCIO7, VCC_3V3);
+
+  BoardInitPmic ();
+
+  /* Enable automatic clock gating */
+  MmioWrite32 (PMU_NOC_AUTO_CON0, 0xFFFFFFFFU);
+  MmioWrite32 (PMU_NOC_AUTO_CON1, 0x000F000FU);
+
+  /* Set core_pvtpll ring length */
+  MmioWrite32 (GRF_CPU_COREPVTPLL_CON0,
+               ((CORE_PVTPLL_RING_LENGTH_SEL_MASK | CORE_PVTPLL_OSC_EN | CORE_PVTPLL_START) << 16) |
+               (5U << CORE_PVTPLL_RING_LENGTH_SEL_SHIFT) | CORE_PVTPLL_OSC_EN | CORE_PVTPLL_START);
+
+  /* Configure MULTI-PHY 0 and 1 for USB3 mode */
+  MultiPhySetMode (0, MULTIPHY_MODE_USB3);
+  MultiPhySetMode (1, MULTIPHY_MODE_USB3);
+
+  /* Set GPIO4 PC4 and PC5 (USB_HOST_PWREN) output high to power USB ports */
+  GpioPinSetDirection (4, GPIO_PIN_PC4, GPIO_PIN_OUTPUT);
+  GpioPinWrite (4, GPIO_PIN_PC4, TRUE);
+  GpioPinSetDirection (4, GPIO_PIN_PC5, GPIO_PIN_OUTPUT);
+  GpioPinWrite (4, GPIO_PIN_PC5, TRUE);
+
+  return EFI_SUCCESS;
+}

edk2-rockchip/Platform/Pine64/PineTab2/Drivers/BoardInitDxe/BoardInitDxe.inf

@@ -0,0 +1,57 @@
+#/** @file
+#
+#  Board init PineTab2 platforms
+#
+#  Copyright (c) 2021 Jared McNeill <[email protected]>
+#  Copyright (c) 2023, Dang Huynh <[email protected]>
+#
+#  SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x0001001A
+  BASE_NAME                      = BoardInitDxe
+  FILE_GUID                      = D595E3B3-A972-4A6D-94F6-11309E3FA496
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = BoardInitDriverEntryPoint
+
+[Sources]
+  BoardInitDxe.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  CryptoPkg/CryptoPkg.dec
+  ArmPlatformPkg/ArmPlatformPkg.dec
+  ArmPkg/ArmPkg.dec
+  EmbeddedPkg/EmbeddedPkg.dec
+  Platform/Rockchip/Rk356x/Rk356x.dec
+  Silicon/Rockchip/Rk356x/Rk356x.dec
+
+[LibraryClasses]
+  ArmLib
+  UefiBootServicesTableLib
+  MemoryAllocationLib
+  BaseMemoryLib
+  BaseCryptLib
+  BaseLib
+  UefiLib
+  UefiDriverEntryPoint
+  DebugLib
+  PrintLib
+  TimeBaseLib
+  TimerLib
+  CruLib
+  GpioLib
+  I2cLib
+  MultiPhyLib
+  OtpLib
+  SocLib
+
+[Protocols]
+
+
+[Depex]
+  TRUE