Merge branch 'test' of github.com:itsshashanksp/kernel_xiaomi_sm6150 …

…into ksu-test

.gitignore

@@ -126,7 +126,7 @@ all.config
 # fetched Android config fragments
 kernel/configs/android-*.cfg
 
-#
-#Ignoring Android.bp link file
-#
-Android.bp
+# kernel builds
+*.zip
+out/
+error.log

Androidbp → Android.bp

@@ -9,9 +9,8 @@ cc_binary_host {
 genrule {
     name: "gen-headers_install.sh",
     srcs: ["scripts/headers_install.sh"],
-    tools: ["unifdef"],
     out: ["headers_install.sh"],
-    cmd: "sed 's+scripts/unifdef+$(location unifdef)+g' $(in) > $(out)",
+    cmd: "sed 's+scripts/unifdef+$$LOC_UNIFDEF+g' $(in) > $(out)",
 }
 
 cc_prebuilt_binary {
@@ -40,6 +39,6 @@ cc_library_headers {
             export_generated_headers: ["qti_generate_kernel_headers_arm64"],
         },
     },
-    vendor: true,
+    vendor_available: true,
     recovery_available: true,
 }

Documentation/admin-guide/ramoops.rst

@@ -32,11 +32,17 @@ memory to be mapped strongly ordered, and atomic operations on strongly ordered
 memory are implementation defined, and won't work on many ARMs such as omaps.
 
 The memory area is divided into ``record_size`` chunks (also rounded down to
-power of two) and each oops/panic writes a ``record_size`` chunk of
+power of two) and each kmesg dump writes a ``record_size`` chunk of
 information.
 
-Dumping both oopses and panics can be done by setting 1 in the ``dump_oops``
-variable while setting 0 in that variable dumps only the panics.
+Limiting which kinds of kmsg dumps are stored can be controlled via
+the ``max_reason`` value, as defined in include/linux/kmsg_dump.h's
+``enum kmsg_dump_reason``. For example, to store both Oopses and Panics,
+``max_reason`` should be set to 2 (KMSG_DUMP_OOPS), to store only Panics
+``max_reason`` should be set to 1 (KMSG_DUMP_PANIC). Setting this to 0
+(KMSG_DUMP_UNDEF), means the reason filtering will be controlled by the
+``printk.always_kmsg_dump`` boot param: if unset, it'll be KMSG_DUMP_OOPS,
+otherwise KMSG_DUMP_MAX.
 
 The module uses a counter to record multiple dumps but the counter gets reset
 on restart (i.e. new dumps after the restart will overwrite old ones).
@@ -90,7 +96,7 @@ Setting the ramoops parameters can be done in several different manners:
         .mem_address            = <...>,
         .mem_type               = <...>,
         .record_size            = <...>,
-        .dump_oops              = <...>,
+        .max_reason             = <...>,
         .ecc                    = <...>,
   };
 

Documentation/asm-annotations.rst

@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/[email protected]
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.

Documentation/devicetree/bindings/gpu/adreno.txt

@@ -194,13 +194,6 @@ Optional Properties:
 				Specify the number of macrotiling channels for this chip.
 				This is programmed into certain registers and also pass to
 				the user as a property.
-- qcom,l2pc-cpu-mask:
-				Disables L2PC on masked CPUs when any of Graphics
-				rendering thread is running on masked CPUs.
-				Bit 0 is for CPU-0, bit 1 is for CPU-1...
-
-- qcom,l2pc-update-queue:
-				Disables L2PC on masked CPUs at queue time when it's true.
 
 - qcom,snapshot-size:
 				Specify the size of snapshot in bytes. This will override

Documentation/devicetree/bindings/i2c/qcom,i2c-qcom-geni.txt

@@ -28,6 +28,7 @@ Optional property:
    5th parameter: t_cycle, desired clock cycle.
 
    Note: Both qcom,clk-freq-out and qcom,clk-cfg should not be specified at the same time.
+-  qcom,bus-recovery: To enable i2c bus clear when SDA line stuck low.
 
 Child nodes should conform to i2c bus binding.
 

Documentation/index.rst

@@ -76,6 +76,14 @@ needed).
    crypto/index
    filesystems/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 

Documentation/networking/ip-sysctl.txt

@@ -737,7 +737,7 @@ tcp_limit_output_bytes - INTEGER
 	typical pfifo_fast qdiscs.
 	tcp_limit_output_bytes limits the number of bytes on qdisc
 	or device to reduce artificial RTT/cwnd and reduce bufferbloat.
-	Default: 262144
+	Default: 1048576 (16 * 65536)
 
 tcp_challenge_ack_limit - INTEGER
 	Limits number of Challenge ACK sent per second, as recommended

Documentation/sysctl/vm.txt

@@ -30,7 +30,6 @@ Currently, these files are in /proc/sys/vm:
 - dirty_writeback_centisecs
 - drop_caches
 - extfrag_threshold
-- extra_free_kbytes
 - hugepages_treat_as_movable
 - hugetlb_shm_group
 - laptop_mode
@@ -262,21 +261,6 @@ any throttling.
 
 ==============================================================
 
-extra_free_kbytes
-
-This parameter tells the VM to keep extra free memory between the threshold
-where background reclaim (kswapd) kicks in, and the threshold where direct
-reclaim (by allocating processes) kicks in.
-
-This is useful for workloads that require low latency memory allocations
-and have a bounded burstiness in memory allocations, for example a
-realtime application that receives and transmits network traffic
-(causing in-kernel memory allocations) with a maximum total message burst
-size of 200MB may need 200MB of extra free memory to avoid direct reclaim
-related latencies.
-
-==============================================================
-
 hugepages_treat_as_movable
 
 This parameter controls whether we can allocate hugepages from ZONE_MOVABLE

Documentation/thermal/sysfs-api.txt

@@ -31,7 +31,7 @@ temperature) and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *type,
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(const char *type,
 		int trips, int mask, void *devdata,
 		struct thermal_zone_device_ops *ops,
 		const struct thermal_zone_params *tzp,
@@ -160,8 +160,9 @@ temperature) and throttle appropriate devices.
 	drivers for temperature calculations.
 
 1.2 thermal cooling device interface
-1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-		void *devdata, struct thermal_cooling_device_ops *)
+1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(
+		const char *name, void *devdata,
+		struct thermal_cooling_device_ops *ops)
 
     This interface function adds a new thermal cooling device (fan/processor/...)
     to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself