Lily58L is 6×4+4keys column-staggered split keyboard.
It is a modified version of the Lily58 Pro pcb from kata0510 and has the the following additional features.
- one rotary encoder support on each side
- underglow with SK6812 Mini RGB led's (6 per side)
- per key RGB led with SK6812 Mini-E led (with legs, easy to solder)
Hardware available at keycapsss.com
| Part name | Quantity | Remarks | Photo |
|---|---|---|---|
| Lily58L PCB | 2 pcs | ||
| Lily58L case | 1 set | 2 solid panels, 2 with holes for switches | |
| Pro Micro or Elite-C | 2 pcs (a mix is possible) | Optionally, use Mill-Max Single Row Socket Headers, to make it hot-swappable. | |
| Key switch (MX) | 58 pcs | ||
| Kailh switch socket | 58 pcs | ||
| Diodes 1N4148W (SMD) | 58 pcs | ||
| TRRS jack | 2 pcs | ||
| Tactile switch | 2 pcs | Reset switch | |
| TRRS cable | 1 cable | Must be a 4-pole cable | |
| Key caps | 58 pcs | 1.5U caps, can also be 1U | |
| Micro USB or USB-C cable | 1 pcs | Dependent what you use on the master half. |
| Part name | Quantity | Remarks | Photo |
|---|---|---|---|
| OLED module | 2 pcs | It is possible to use only one display | |
| SK6812 Mini | 12 pcs | RGB led's for underglow | |
| SK6812 Mini-E | 58 pcs | RGB led's for keycap backlight (underglow led's must be soldered, because they are connected in series) |
Right now the Lily58L code is not merged into QMK Master. You can find the code here.
Clone/download the Lily58L firmware branch and execute the following in the qmk_firmware directory to write the default Lily58L keymap
git checkout Lily58L
qmk compile -kb lily58l -km default