adding github workflow #1
Sensirion-BotAnnotations
171 errors
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.11, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.8, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.9, ubuntu-22.04)
Process completed with exit code 1.
|
|
test / test (3.10, ubuntu-22.04)
Process completed with exit code 1.
|
|
test / test (3.11, ubuntu-22.04)
Process completed with exit code 1.
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.10, macos-latest)
[notice] A new release of pip is available: 23.0.1 -> 24.0
[notice] To update, run: python3.10 -m pip install --upgrade pip
|
|
test / test (3.10, macos-latest)
Process completed with exit code 1.
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.9, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.9, macos-latest)
[notice] A new release of pip is available: 22.0.4 -> 24.0
[notice] To update, run: python3.9 -m pip install --upgrade pip
|
|
test_scd30.test_stop_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_stop_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests/test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.8, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.8, macos-latest)
Process completed with exit code 1.
|
|
test / test (3.8, macos-latest)
[notice] A new release of pip is available: 21.1.1 -> 24.0
[notice] To update, run: python3.8 -m pip install --upgrade pip
|
|
test_scd30.test_stop_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.11, windows-latest)
Process completed with exit code 1.
|
|
test_scd30.test_stop_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_stop_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_measurement_interval1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_altitude_compensation1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_set_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_temperature_offset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_activate_auto_calibration1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_auto_calibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_get_force_recalibration_status1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_read_firmware_version1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_soft_reset1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test_scd30.test_start_periodic_measurement1:
tests\test_scd30.py#L1
failed on setup with "ValueError: Please specify the serial port to be used with the '--serial-port' argument."
|
|
test / test (3.10, windows-latest)
Process completed with exit code 1.
|
|
test / test (3.9, windows-latest)
Process completed with exit code 1.
|