STM32-HAL

This library provides high-level access to STM32 peripherals.

Requirements

1. Provide high-level access to most STM32 peripherals
2. Support these STM32 families: F3, F4, L4, L5, G, H, U, and W
3. Allow switching MCUs with minimal code change
4. Provide a consistent API across peripheral modules
5. Support both DMA and non-DMA interfaces
6. Be suitable for commercial projects
7. Implement embedded-hal traits for all applicable peripherals
8. Provide a clear, concise API
9. Provide source code readable by anyone cross-checking a reference manual (RM)

Specifications

• Base code on instructions described in reference manuals (RM); document inline with the relevant excerpts [4, 9]
• Use STM32 Peripheral Access Crates to allow high-level register access [2]
• Wrap PAC register blocks in structs that represent the applicable peripheral, and access features of these peripherals using public methods [1]
• Use #[cfg] blocks, and the cfg_if! macro to handle differences between MCUs; use separate modules where large differences exist [2, 3]
• Use both peripheral struct methods, and embedded-hal trait implementations for non-DMA interfaces; use additional struct methods for DMA interfaces [4, 5, 7]
• Favor functionality, ergonomics, and explicit interfaces [6, 8]
• Document configuration code with what registers and fields it sets, and desriptions from RMs [4, 9]
• Provide examples and documentation that demonstrate peripheral use with interrupts and DMA [6]

Supported MCUs

F3, F4, L4, L5, G0, G4, H7, and WB. U5 is planned once its SVD files and PAC become available. WL support is a WIP, with many features not implemented.

Operationally tested on the following devices:

• STM32F303
• STM32F411
• STM32L476, L433, L443, L412, L432
• STM32WB5MMG
• STM32H743(V)

Getting started

Review the syntax overview example for example uses of many of this library's features. Copy and paste its whole folder (It's set up using Knurling's app template), or copy parts of Cargo.toml and main.rs as required.

The blinky example, written by toudi, provides a detailed example and instructions for how to set up a blinking light (ie hello world) using an STM32F411 "blackpill" board. Its readme provides instructions for how to get started from scratch, and its code contains detailed comments explaining each part.

The conductivity module example is a complete example of simple production firmware. It uses the DAC, I2C, Timer, and UART peripherals, with a simple interupt-based control flow.

Additional examples in the examples folder demonstrate how to use various STM32 peripherals; most of these examples focus on a single peripheral.

When specifying this crate as a dependency in Cargo.toml, you need to specify a feature representing your MCU. If this is for code that runs on an MCU directly (ie not a library), also include a run-time feature, following the template l4rt. For example:

cortex-m = "0.7.3"
cortex-m-rt = "0.6.13"
stm32-hal2 = { version = "^1.0.1", features = ["l4x3", "l4rt"]}

If you need embedded-hal traits, include the embedded-hal feature.

You can review this section of Cargo.toml to see which MCU and runtime features are available.

Example highlights:

use cortex_m;
use cortex_m_rt::entry;
use stm32_hal2::{
    clocks::Clocks,
    gpio::{Pin, Port, PinMode, OutputType},
    i2c::{I2c, I2cDevice},
    low_power,
    pac,
    timer::{Timer, TimerInterrupt},
};

#[entry]
fn main() -> ! {
    let mut cp = cortex_m::Peripherals::take().unwrap();
    let mut dp = pac::Peripherals::take().unwrap();

    let clock_cfg = Clocks::default();
    clock_cfg.setup(&mut dp.RCC, &mut dp.FLASH).unwrap();

    let mut pb15 = Pin::new(Port::A, 15, PinMode::Output);
    pb15.set_high();

    let mut timer = Timer::new_tim3(dp.TIM3, 0.2, &clock_cfg);
    timer.enable_interrupt(TimerInterrupt::Update);

    let mut scl = Pin::new(Port::B, 6, PinMode::Alt(4));
    scl.output_type(OutputType::OpenDrain);

    let mut sda = Pin::new(Port::B, 7, PinMode::Alt(4));
    sda.output_type(OutputType::OpenDrain);

    let i2c = I2c::new(dp.I2C1, I2cDevice::One, 100_000, &clock_cfg);

    loop {
        i2c.write(0x50, &[1, 2, 3]);
        low_power::sleep_now(&mut cp.SCB);
    }
}

Why this module is different from stm32yxx-hal libraries

There are some areas where design philosophy is different. For example: GPIO type-checking, level-of-abstraction from registers/PAC, role of DMA, role of embedded-hal traits in the API, feature parity among STM32 families, code documentation, code structure, and clock config.

Docs caveat

The Rust docs page is built for STM32L4x3, and some aspects are not accurate for other variants. We currently don't have a good solution to this problem, and may self-host docs in the future.

Contributing

PRs are encouraged. Documenting each step using reference manuals is encouraged where applicable.

Most peripheral modules use the following format:

• Enums for various config settings, that implement #[repr(u8)] for their associated register values
• A peripheral struct that has public fields for config. This struct also includes a private regs field that is the appropriate reg block. Where possible, this is defined generically in the implementation, eg: U: Deref<Target = pac::usart1::RegisterBlock>. Reference the stm32-rs-nightlies Github to identify when we can take advantage of this.
• If config fields are complicated, we use a separate PeriphConfig struct owned by the peripheral struct. This struct impls Default.
• A constructor named new that performs setup code
• enable_interrupt and clear_interrupt functions, which accept an enum of interrupt type.
• Add embedded-hal implementations as required, that call native methods. Note that we design APIs based on STM32 capabilities, and apply EH traits as applicable. We only expose these implementations if the embedded-hal feature is selected.
• When available, base setup and usage steps on instructions provided in Reference Manuals. These steps are copy+pasted in comments before the code that performs each one.
• Don't use PAC convenience field settings; they're implemented inconsistently across PACs. (eg don't use something like en.enabled(); use en.set_bit().)
• If using a commonly-named configuration enum like Mode, prefix it with the peripheral type, eg use RadarMode instead. This prevents namespace conflicts when importing the enums directly.

Example module structure:

#[derive(clone, copy)]
#[repr(u8)]
/// Select pulse repetition frequency. Sets `FCRDR_CR` register, `PRF` field.
enum Prf {
    /// Medium PRF (less than 10Ghz)
    Medium = 0,
    /// High PRF (10Ghz or greater)
    High = 1,
}

#[derive(clone, copy)]
/// Available interrupts. Enabled in `FCRDR_CR`, `...IE` fields. Cleared in `FCRDR_ICR`.
enum FcRadarInterrupt {
    /// Target acquired
    TgtAcq,
    /// Lost the track, for any reason
    LostTrack,
}

/// Represents a Fire Control Radar (FCR) peripheral.
pub struct FcRadar<R> {
    // `regs` is public, so users can use the PAC API directly, eg for unsupported features.
    pub regs: R, 
    pub prf: Prf,
}

impl<F> FcRadar<R>
where
    R: Deref<Target = pac::fcrdr1::RegisterBlock>,
{
    /// Initialize a FCR peripheral, including configuration register writes, and enabling and resetting
    /// its RCC peripheral clock.
    pub fn new(regs: R, prf: Prf) -> Self {
        // A critical section here prevents race conditions, while preventing
        // the user from needing to pass RCC in explicitly.
        free(|cs| {
            let mut rcc = unsafe { &(*RCC::ptr()) };
            rcc_en_reset!(apb1, fcradar1, rcc);
        });

        regs.cr.modify(|_, w| w.prf().bit(prf as u8 != 0));        

        Self { regs, prf }
    }

    /// Track a target. See H8 RM, section 3.3.5.
    pub fn track(&mut self, hit_num: u8) -> Self {
        // RM: "To begin tracking a target, perform the following steps:"

        // 1. Select the hit to track by setting the HIT bits in the FCRDR_TR register. 
        #[cfg(feature = "h8")]
        self.regs.tr.modify(|_, w| unsafe { w.HIT().bits(hit_num) });
        #[cfg(feature = "g5")]
        self.regs.tr.modify(|_, w| unsafe { w.HITN().bits(hit_num) });

        // 2. Begin tracking by setting the TRKEN bit in the FCRDR_TR register.
        self.regs.tr.modify(|_, w| w.TRKEN().set_bit());

        // In tracking mode, the TA flag can be monitored to make sure that the radar
        // is still tracking the target.
    }
    
    /// Enable an interrupt.
    pub fn enable_interrupt(&mut self, interrupt: FcRadarInterrupt) {
        self.regs.cr.modify(|_, w| match interrupt {
            FcRadarInterrupt::TgtAcq => w.taie().set_bit(),
            FcRadarInterrupt::LostTrack => w.ltie().set_bit(),
        });
    }

    /// Clear an interrupt flag - run this in the interrupt's handler to prevent
    /// repeat firings.
    pub fn clear_interrupt(&mut self, interrupt: FcRadarInterrupt) {
        self.regs.icr.write(|w| match interrupt {
            FcRadarInterrupt::TgtAcq =>  w.tacf().set_bit(),
            FcRadarInterrupt::LostTrack => w.ltcf().set_bit(),
        });
    }
}

#[cfg(feature = "embedded-hal")]
/// Wrap our native methods with `embedded-hal` traits.
impl<F> embedded_hal::TargetTrack for FcRadar<F>
where
    F: Deref<Target = pac::fcrdr1::RegisterBlock>,
{
    type Error = Error;

    fn track(&mut self, track: u8) -> Result<(), Error> {
        FcRadar::track(self, track);
        Ok(())
    }
}

STM32WB and WL radio

This library doesn't include any radio functionality for the STM32WB. If you'd like to use it with bluetooth, use this HAL in conjuction with with @eupn's stm32wb55 bluetooth library.

STM32WL radio support is WIP, and will be provided through interaction withnewAM's stm32wl-hal library.

Errata

• SDIO and ethernet unimplemented
• SAI unimplemented on G4
• DMA unimplemented on F4
• The DMA2 peripheral is unimplemented
• Only bxCAN is implemented - the fdCAN used on newer families is unimplemented
• USB unimplemented for H7
• USART synchronous mode, and auto-baud-rate detection unimplemented
• USART interrupts unimplemented on F4
• H7 clock default is suitable for single-core 480Mhz variants only.
• PWM input unimplemented
• CRC unimplemented for L5, F4, G0, and G4
• Flash read/write unimplemented on H7
• Low power timers (LPTIM) and low power usart (LPUSART) unimplemented
• ADC unimplemented on F4
• ADC3 unimplemented on H7
• Low power modes beyond csleep and cstop aren't implemented for H7
• WB and WL are missing features relating to second core operations and RF
• WL is missing support for many peripherals
• L4+ MCUs not supported