Work In Progress
General information regarding the Ender 3 Pro/V2.
475 mm x 470 mm x 620 mm (w/spool on top)
475 mm x 470 mm x 490 mm (w/o spool on top)
220mm x 200mm x 235mm
Depending on the letter designated on the card reader will determine the stepper motor drivers for the motherboard (not a comprehensive list and may change).
Letter | Driver |
---|---|
A | TMC2208 |
B | TMC2209 |
C | HR4988 |
E | A4988 |
H | TMC2225 |
The fans found on most Creality 3D Printers are quite loud. Below you'll find what is usually installed on the machine and some recommendations.
Fan | Size | Voltage |
---|---|---|
Power Supply | 4010 | 12v |
Hotend | 4010 | 24v |
Part Fan | 4020 Blower | 24v |
Motherboard Fan | 4010 | 24v |
Note: Double check the power supply fan as some people have received Creality branded PSU's with 12v fans.
Brand | Part # | Size | Voltage | Air Flow (CFM) | Purchase Link |
---|---|---|---|---|---|
Orion | OD4010-24LB | 4010 | 24v | 4.7 | Digikey |
Sunon | MF40202V2-1000U-A99 | 4020 | 24v | 7.7 | Digikey |