This is the artifact that uses CHiLL for data dependence analysis, IEGenLib for simplification, and produces results for paper submitted to arXiv in July 2018.
After building the driver and its dependencies (see below) run the following:
./simplifyDriver list.txt
The output will be the results of doing data dependence analysis on all of the C kernels specified in the list.txt file. The list.text file includes names of some JSON files. Each JSON file contains the relative path of an input kernel that we want to extract its dependences and analyze them for partial parallelisim. The JSON files also contain index array properties and analysis information like which loops we want to analyze.
The index array properties are specified inside JSON files for each kernel. The properties are specified in two ways:
- Some mathmatical properties about a function are defined for each index array. For instance if you look at data/ic0_csc.json file which is the input JSON file for Incomplete Cholesky code (data/ic0_csc.c), you can see the following:
{
"Name" : "colPtr",
"Domain" : "{[j]:0<=j &&j<n}",
"Range" : "{[i]:0<=i &&i<nnz}",
"Bijective" : "false",
"Monotonicity" : "Monotonic_Increasing"
}
Here we define four properties for colPtr index array: (1) Domain, which would be the range of the numbers that can be used to index colPtr itself. (2) Range, which is the range values stored in coPtr. (3) Whether the unineterpreted function (UF) representing colPtr can be considered bijective. (4) Whether UF can be considered monotonic and in what manner.
- More general index array properties such as a relationship between two or more index arrays, etc, can be defined as universially quantifed assertions. For instance if you look back at data/ic0_csc.json file again, you can see the following:
"User Defined" :
[
{
"Type" : "Triangularity",
"UniQuantVar" : "[e1,e2]",
"Rule (comment)" : "Forall e1,e2, colPtr(e1) < e2 => e1 < rowIdx(e2)",
"p" : "colPtr(e1) < e2",
"q" : "e1 < rowIdx(e2)"
}
]
This assertion defines the Triangularity properties that can be expressed
with a relationship between colPtr and rowIdx index arrays.
In this syntax, we are trying to define
Forall e1,e2, e1 < colPtr(e2) => rowIdx(e1) < e2 assertion. In the components,
UniQuantVar field defines the Forall e1,e2 part;
p defines the left hand side of the inference, e.g the colPtr(e1) < e2 part;
q defines the left hand side of the inference, e.g the e1 < rowIdx(e2) part.
Right now, we are using the name of the property for our evaluation purposes. Nonetheles, users can specify other assertions by giving it one of the already defined names like Triangularity or CoMonotonicity. This way the assertion would be considered when we are checking for unsatisfiability or simplifying the dependences. However, for the purpose of gathering results, the arbitrary property's results gets counted with other results for the propery which name was given while defining it.
Index array properties defined in the JSON files get stored in the IEGenLib library's environment as universially quantified assertions. Then, whenever they are needed for instance for detecting unsatisfiable relations, they are instantiated as described in Section 3.4 of the arXiv submission.
In IEGenLib, the universially quantified assertions are stored as objects of UniQuantRule class that is defined inside IEGenLib/src/set_relation/environment.h. This class stores the assertions as two iegenlib::Set object, one for left hand side, and one for right hand side, which makes defining assertions easy since iegenlib::Set's can represent any set of equalitiy and inequality constraints that include uninterpreted function symbols with arbitrary parameters. Assertions can be defined and added to the environment with following syntax:
UniQuantRule *uqRule;
uqRule = new UniQuantRule("Triangularity", "[e1,e2]", "colPtr(e1) < e2", "e1 < rowIdx(e2)");
currentEnv.addUniQuantRule( uqRule );
The addUniQuantRule( uqRule ) call adds the assertion to the environment.
We have tested the artifact build and execution on the following platform:
- OS: Ubuntu 16.04
- GCC: gcc 5.4.0 (Default on the OS)
** There is a installation script, install.sh, is in the same directory as this README that can build all the dependencies and the driver for the artifact including Rose compiler and boost library. Nonetheless, it is only tested in the above platform. Please note that the installation script must be executed with sudo access:**
sudo ./install.sh
In case users need to use other platforms or in case the script fails for whatever reason, users can follow these more detailed instructions to build all the dependencies step by step:
These instructions assume that you are starting from the root directory of the artifact. To build the driver for the artifact, these instructions indicate how to build and locally install the following major components: (1) Boost library; (2) rose compiler; (3) IEGenLib library; (4) CHILL compiler. Of these components, the rose compiler, which is a dependency for CHILL, is the most demanding one in terms of building effort.
These softwares are prerequisites for installing all the subsequent components:
sudo apt-get install git wget tar unzip make autoconf automake cmake libtool default-jdk default-jre flex bison python-dev texinfo gnuplot-x11 evince
Boost library is a prerequisit for rose compiler:
mkdir boost
export BOOSTHOME=$(pwd)/boost
wget http://sourceforge.net/projects/boost/files/boost/1.60.0/boost_1_60_0.tar.gz
tar -xvzf boost_1_60_0.tar.gz
cd boost_1_60_0/
./bootstrap.sh --prefix=$BOOSTHOME --with-libraries=chrono,date_time,filesystem,iostreams,program_options,random,regex,signals,system,thread,wave
./b2 --prefix=$BOOSTHOME -sNO_BZIP2=1 install
cd ..
Detailed insructions for installing rose compiler including some trouble shooting information can be found in the official installation guide of rose compiler webpage:
http://rosecompiler.org/ROSE_HTML_Reference/installation.html
The following is a quick installation guide:
- Setting up the environment
mkdir rose_build
export ROSE_SRC=$(pwd)/rose
export ROSEHOME=$(pwd)/rose_build
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${BOOSTHOME}/lib
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:${ROSEHOME}/lib
git clone https://github.com/rose-compiler/rose
cd rose
- Getting the following version instead of the latest version is highly recommended for installing CHILL.
git checkout 365bb6857c
./build
cd $ROSEHOME
- Excluding JAVA might make things easier.
${ROSE_SRC}/configure --prefix=$ROSEHOME --enable-languages=c,c++ --with-boost=${BOOSTHOME} --without-java
- You can remove -j6 if yopu do not wish to build with multi-threading activated, or at least decrease the number of threads by decrease=ing the j6 to jX (with X being desired number of threads)
make -j6 install-rose-library FRONTEND_CXX_VENDOR_AND_VERSION2=gnu-5.3
cd ..
Consdering that the artifact already have the appropriate IEGenLib version, you do not need to get this library from its github repository. (https://github.com/CompOpt4Apps/IEGenLib)
export IEGENHOME=$(pwd)/IEGenLib/iegen
cd IEGenLib
./configure
make
make install
cd ..
Considering that the artifact already has the appropriate CHILL version, you do not need to get this library from internet. Please note that although CHILL is made publicly available as tar balls that are relased every once in a while, it does not have a public github repository. Use following commands to build the CHILL version that is already available in the artifacts root directory:
cd chill
mkdir build
cd build
cmake .. -DROSEHOME=$ROSEHOME -DBOOSTHOME=$BOOSTHOME -DIEGENHOME=$IEGENHOME
make -j6
cd ../..
Use following command to build the driver for reproducing the result:
g++ -O3 -o simplifyDriver simplification.cc -I IEGenLib/src IEGenLib/build/src/libiegenlib.a -lisl -std=c++11