Numato-Opsis.md

layout	title	published	tags
default	Numato Opsis	true	hardware, numato-opsis

Numato Opsis

The Numato Opsis is the first HDMI2USB production board developed specifically for the HDMI2USB project (as part of the TimVideos project).

The board is entirely open; both the firmware that runs on the device, and the schematics for the device.

The board can now be ordered from Numato Labs

<iframe src="https://player.vimeo.com/video/138276604" width="500" height="281" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen style="height:281px; width: 500px;"></iframe>

Getting Started

• Purchase a board from Numato Labs or directly from Numato.com.
• Load the firmware (see Firmware).
• Test and use the device. (see Numato Opsis - Using).

Useful Resources

• Numato Opsis Docs (source)
• Hardware Design Repository
• Sample Code Repository

Technical Specifications

Cost	$USD 349
FPGA	Xilinx Spartan-6 LX45T FPGA
Memory	256Mbyte DDR3
Video Interfaces	2 x HDMI Input[4], 2 x HDMI Output[4], 1 x DisplayPort Input, 1 x DisplayPort Output
Comms	30Mbyte/s FX2 Cypress, Gigabit Ethernet, USB 2.0 OTG
Storage	XXMbyte SPI Flash, SD Card (unsupported)
Audio	None
Expansion	1 x Tim's Open FPGA Expansion Connector (TOFE)
Power Supply	12V @ 2A

{::nomarkdown} {:/nomarkdown}

Footnotes

{::nomarkdown}

• [4]: On the Numato Opsis board, all the HDMI pins are under the FPGA control. This means the board support hot plug detection and control and also CEC support (which is missing from the firmware).

{:/nomarkdown}