CHANGELOG.md

Changelog

v4.0

New

• Alerts now include link to Google Maps for point where anomaly was detected. [ashmastaflash]

• Add application uptime to performance metrics events. [ashmastaflash]

Changes

• Increased geo drift threshold to 100m. [ashmastaflash]

• Reduce GPS update delay to 5 seconds if mode is set to 'solo'. [ashmastaflash]

• Added documentation for using U-blox7 GPS device. [ashmastaflash]

• GeoIp will set to 127.0.0.1 if it fails to determine public IP address. [ashmastaflash]

• Added 'solo' mode functionality for disconnected startup and operation of sensor. [ashmastaflash]

• Container logs to tty1 (HDMI) [ashmastaflash]

• GPS coordinates in all ARFCN and GSM modem channel-specific events. [ashmastaflash]

• Set default MCCs to US MCCs. [ashmastaflash]

• Set default feed url to auto-built SITCH feed. [ashmastaflash]

• Console logs to /data/sitch/log/console.log. [ashmastaflash]

• Changed 'geometry' field to 'location'. [ashmastaflash]

• Adding event_timestamp to application initialization log messages. [Ash Wilson]

• Add event_timestamp to sensor-generated alerts. [Ash Wilson]

• Add event_timestamp fields to messages generated by Kalibrate. [Ash Wilson]

• Changed timestamp field name in heartbeat and health_check events to event_timestamp, to be consistent with other messages' schemas. [Ash Wilson]

• Add event_timestamp to gps message structure. [Ash Wilson]

• Add event_timestamp to geoip message structure. [Ash Wilson]

• New format for gsm_modem messages. [Ash Wilson]

v3.7.3 (2017-04-22)

Other

• Added data documentation about cells.log. [seamus tuohy]

• Added ability to not update feeds. [seamus tuohy]

v3.7.2 (2017-04-13)

New

• Use HEALTH_CHECK_INTERVAL to override default interval of 3600s between sensor self-checks. [Ash Wilson]

v3.7.1 (2017-04-04)

Changes

• Changed feed dir to /data/sitch/feed, and log dir to /data/sitch/log/. Relocated filebeat registry to /data/sitch/log/fb_registry. [Ash Wilson]

  • Target specific radio types. Speed up feed ingestion for GSM-only sensors.

  • Added alarm 130 for detection of a bad Mobile Country Code (MCC).

  • Use human-friendly sensor name in metrics, derived from Resin device name. Location name override still works for non-Resin environments.

  • Length of sensor processing queues added to health check.

  • Alerts contain sensor ID, derived from Resin device name.

  • Geo distance check validates that lon/lat could be valid coordinates.

  • Fixed lat/lon swap bug in Utility.calculate_distance

v3.7.0 (2017-03-26)

Other

• Test (#71) (#72) [Ash Wilson]

  chg: usr: Changed feed dir to /data/sitch/feed, and log dir to /data/sitch/log/. Relocated filebeat registry to /data/sitch/log/fb_registry

  • new: usr: Target specific radio types. Speed up feed ingestion for GSM-only sensors.

  • chg: usr: Added alarm 130 for detection of a bad Mobile Country Code (MCC).

  • chg: usr: Length of sensor processing queues added to health check.

  • chg: usr: Alerts contain sensor ID, derived from Resin device name.

v3.6.0 (2017-03-25)

New

• Time difference greater than between satellite and system triggers an alarm. [ashmastaflash]

• GPS events contain metric for minutes of time drift between satellite and system time. [ashmastaflash]

Changes

• GPS events contain satellite time and local system time. [ashmastaflash]

v3.5.0 (2017-03-14)

New

• Migrated CGI feed to SQLite. [ash]

• Added support for SIM800L GSM modem. [Ash Wilson]

• Device auto-detection now supports SIM900 GSM modems. [Ash Wilson]

• Added geo correlator. [Ash Wilson]

Changes

• Queue depth periodically reported in device STDOUT logs. [Ash Wilson]

• Christmas Tree tests veryfy end-to-end event processing, like a pseudo runner.py. [Ash Wilson]

Fix

• Corrected issue where most recent record timestamp was being set to epoch 0 if no new records were written to DB. [Ash Wilson]

v3.4 (2017-01-29)

New

• Health check metrics for CPU, memory, and disk utilization. [Ash Wilson]

• Logs IMSI of SIM installed in sensor. [Ash Wilson]

Fix

• Corrected path for dropping certs. balena-os/balena-supervisor#208 indicates that the path we used before is no longer available. [Ash Wilson]

v3.3 (2016-12-12)

New

• Checks CGI against whitelist before alerting. [Ash Wilson]

Changes

• Better exception handling in GsmModemEnricher.build_chan_here() [Ash Wilson]

• Added kwarg named 'optional' to ConfigHelper.get_list_from_env(). Setting optional=True will allow the method to return an empty list instead of causing a hard exit. [Ash Wilson]

v3.2.0 (2016-11-26)

New

• Geo_anchor replaces geo_ip as point of reference for geo_drift_check(), which alerts on the operation of a GPS spoofing device. [Ash Wilson]

Changes

• Improved regex for parsing operator string. [Ash Wilson]

Fix

• Completed implementation of geo_anchor instead of geoip for GPS drift check. [Ash Wilson]

• Corrected bad logic involved in processing GPS alerts. [Ash Wilson]

• Exception handling added for when cell operator string sanitizing fails. [Ash Wilson]

Other

• Wiring up GSM registration string cleaner. [Ash Wilson]

v3.1.1 (2016-11-21)

Other

• Updating CHANGELOG, sitchlib version. [Ash Wilson]

• Changing to resin-produced base image (Debian, for now) [Ash Wilson]

• Changing over to Resin-provided Debian Jessie base image. [Ash Wilson]

• GSM modem operator ID string cleanup. [Ash Wilson]

• Added a circuit breaker to catch unusable gsm_modem_consumer configuration. [Ash Wilson]

• GsmModem cleanup and complexity reduction in runner. [Ash Wilson]

• Reducing complexity, refactor of gsm_modem_consumer. [Ash Wilson]

• Further consolidation around disabled service handling. [Ash Wilson]

• Reducing duplicate code for disabled services alerting. [Ash Wilson]

• Correcting parsing logic to avoid unnecessary alerts if BTS is not in DB. [Ash Wilson]

• Refactoring GsmModemEnricher.enrich_gsm_modem_scan() to reduce complexity. [Ash Wilson]

• Improving output readability from DeviceDetector, creating more general indented pretty printer in Utility. [Ash Wilson]

• Adding integration and unit tests for DeviceDetector. [Ash Wilson]

• Reducing complexity in interrogator, adding interrogator_matcher() [Ash Wilson]

• Refactor in DeviceDetector. [Ash Wilson]

v3.1 (2016-11-17)

Other

• Updating README, init.version, and CHANGELOG for v3.1. [Ash Wilson]

• Removing debug print statement. [Ash Wilson]

• Shouldn't attempt to enrich if arfcn == 0. [Ash Wilson]

• Corrections for GSM modem provider detection. [Ash Wilson]

• Improving scan start and end times for ARFCN enrichment- now re-sets finish time when the arfcn enricher is ready to pass the event back to the main enricher module. [Ash Wilson]

• Adding support for ARFCN events. [Ash Wilson]

• ARFCN scan date normalization fix. [Ash Wilson]

• Changing approach to getting enriched ARFCNs in queue. [Ash Wilson]

• Improving enriched ARFCN messages. [Ash Wilson]

• Fixing print statements, in a parentetical sense. [Ash Wilson]

• Modernizing some print statements. [Ash Wilson]

• Better exception handling in build_chan_here() [Ash Wilson]

• Correcting is_valid_json args. [Ash Wilson]

• Wiring up ARFCN enricher/alerter. [Ash Wilson]

• Checking JSON validity before unpacking GPSD output. [Ash Wilson]

• Refactoring to use utility's public IP getter. [Ash Wilson]

• Trying to catch a rogue JSON error. [Ash Wilson]

• Adding a routine to flush after stopping engineering mode. [Ash Wilson]

• Better messaging for GSM engineering mode enable/disable. [Ash Wilson]

• Re-factoring GSM modem engineering mode handling. [Ash Wilson]

• Corrected mistake in refactoring, TYVM, unit tests. [Ash Wilson]

• Big re-factor inside GsmModemEnricher to simplify enrich_gsm_modem_scan() [Ash Wilson]

• Fixes #24 by stopping engineering mode before interrogating GSM modem for registration and configuration information. [Ash Wilson]

• Re-factor and consolidate feed file retrieval mechanism. [Ash Wilson]

• Removal of unnecessarily verbose output in FeedManager. [Ash Wilson]

• Minor re-factoring in GsmModemEnricher. [Ash Wilson]

• Adding version identifier to startup output. [Ash Wilson]

• Re-factor GsmModemEnricher to reduce duplicate code. [Ash Wilson]

• Re-factor duplicated functionality in FeedManager() [Ash Wilson]

v3.0 (2016-11-09)

Other

• Tweaking codeclimate-related configs. [Ash Wilson]

• Adding CHANGELOG. [Ash Wilson]

• Making log method and mode in ConfigHelper easier to deal with. [Ash Wilson]

• Updating README for v3. [Ash Wilson]

• Adding git changelog generator config. [Ash Wilson]

• Adding version and author attributes to init, using to help with changelog generation. [Ash Wilson]

• Adding codeclimate configs. [Ash Wilson]

• Is is not ==... [Ash Wilson]

• Noise maker for bad messages hitting write_log_message() [Ash Wilson]

• Cleaning out old comments, improving stdout messaging. [Ash Wilson]

• Minor edits. [Ash Wilson]

• Re-naming binaries, re-aligning as appropriate. [Ash Wilson]

• Removing some supporting code for logstash-forwarder, general cleanup. [Ash Wilson]

• That's not how you spell friendly... [Ash Wilson]

• Fixing json parse issues for primary BTS change alerts. [Ash Wilson]

• Correcting reference to sitch init events. [Ash Wilson]

• Adding instructions for expanding GSM device support. [Ash Wilson]

• Adding initialization log message generation points. [Ash Wilson]

• Removing unnecessary filebeat.yml file. [Ash Wilson]

• Adding support for initialization-related log messages. [Ash Wilson]

• Piping all CMD output to stdout. [Ash Wilson]

• Fixing enricher for integration tests. [Ash Wilson]

• Better placement for CGI processing. [Ash Wilson]

• Better placement for CGI processing. [Ash Wilson]

• Corrected bad variable name in kal enricher. [Ash Wilson]

• Adding integer fields for CGI and ARFCN. [Ash Wilson]

• Fixed filebeat config. [Ash Wilson]

• Catch SocketError from gpsd. [Ash Wilson]

• Messaging around cache behavior for ARFCN enricher. [Ash Wilson]

• Caching for arfcn enrichment. [Ash Wilson]

• Correcting issue with bad log file reference. [Ash Wilson]

• Cleaning up unnecessary print statements. [Ash Wilson]

• Better messaging around feed manager. [Ash Wilson]

• Better messaging around feed manager. [Ash Wilson]

• Better messaging around feed manager. [Ash Wilson]

• Aligining feed manager components. [Ash Wilson]

• Fixing reference to nonexistent method. [Ash Wilson]

• Wiring up the filebeat stuff. [Ash Wilson]

• Wiring up the filebeat stuff. [Ash Wilson]

• Wiring up feed retrieval for FCC and MCC. [Ash Wilson]

• Switching to filebeat. [Ash Wilson]

• Fixing bad order of args for GSM modem enrichment routine. [Ash Wilson]

• WIP: debugging GSM modem report parsing. [Ash Wilson]

• Removing GSM report debug output. [Ash Wilson]

• Letting key errors blow up for troubleshooting. [Ash Wilson]

• Doing a cleaner yaml dump for filebeat config file. [Ash Wilson]

• Adding pyyaml in build. [Ash Wilson]

• Adding initial support for filebeats. [Ash Wilson]

• Adding filebeat binaries. [Ash Wilson]

• Updating Dockerfile to add filebeat binary. [Ash Wilson]

• Testing logging. [Ash Wilson]

• Try formatting output differently. [Ash Wilson]

• Try dumping json. [Ash Wilson]

• Switching to LogstashFormatterV1. [Ash Wilson]

• Switching to LogstashFormatterV1. [Ash Wilson]

• Dropping Logstash CA into /etc/ssl/certs. [Ash Wilson]

• Switching back to LogstashHandler. [Ash Wilson]

• Switching back to LogstashHandler. [Ash Wilson]

• Switching back to LogstashHandler. [Ash Wilson]

• Switching back to LogstashHandler. [Ash Wilson]

• Fixing logger. [Ash Wilson]

• Fixing Dockerfile. [Ash Wilson]

• Fixing Dockerfile. [Ash Wilson]

• Fixing Dockerfile. [Ash Wilson]

• Fixing Dockerfile. [Ash Wilson]

• Tweaking Logstash client settings. [Ash Wilson]

• WIP: logstash in python. [Ash Wilson]

• WIP: moving to pure-python logstash delivery. [Ash Wilson]

• Converging logging methods to python module- cutting out logstash-forwarder. [Ash Wilson]

• Completed service-specific heartbeats. Fixes #3. [Ash Wilson]

• WIP: heartbeat message generation. [Ash Wilson]

• WIP: heartbeat message generation. [Ash Wilson]

• Changing method for heartbeat message generation. [Ash Wilson]

• Wiring up the rest of the heartbeat messages. [Ash Wilson]

• Adding per-service heartbeat messages. [Ash Wilson]

• Adding GSM modem config dump. [Ash Wilson]

• Improving GSM startup process. [Ash Wilson]

• Getting registration information from GSM modem. [Ash Wilson]

• Adding waits and better logging for GSM modem initialization. [Ash Wilson]

• Setting GSM modem to auto-register, other minor cleanup. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Moving all usbtty interaction to 4800. [Ash Wilson]

• Adding more verbose device detection output. [Ash Wilson]

• Adding waits to give usbtty ports a chance to sync. [Ash Wilson]

• Normalizing the handling of serial connection flushing/closing in device detector. [Ash Wilson]

• Adding verbose device detector output on device init. [Ash Wilson]

• Flushing serial port before closing, in device detector. [Ash Wilson]

• Improvements to device detector. [Ash Wilson]

• Improvements to device detector. [Ash Wilson]

• Improvements to device detector. [Ash Wilson]

• Adding a space into the ID string query. [Ash Wilson]

• Adding waits, change GSM detect to 9600. [Ash Wilson]

• Changing port speed and adding a short pre-init delay for GSM modem. [Ash Wilson]

• Improving formatting for GSM modem engineering mode init string. [Ash Wilson]

• Making noise for GSM modem. [Ash Wilson]

• Correcting reference to class method in config helper. [Ash Wilson]

• Improving interaction with device detector. [Ash Wilson]

• Aligning serial port speeds, all to 4800. Added messaging to GPS initialization. [Ash Wilson]

• Adding messaging for otherwise unparseable GSM modem output. [Ash Wilson]

• Adding debug output, chasing down GSM modem stuff. [Ash Wilson]

• Improving test coverage, added kal enricher to init.py. [Ash Wilson]

• Fixing travis-ci config. [Ash Wilson]

• Commenting out unnecessary code, will clean up later. [Ash Wilson]

• Improving failure handling for log output. [Ash Wilson]

• Implementing deepcopy for geojson and gps info. [Ash Wilson]

• Now debugging GPS device. [Ash Wilson]

• Adding some debug statements to geoip listener. [Ash Wilson]

• Updating Dockerfile for LatLon python module. [Ash Wilson]

• Adding ARFCN enricher components. [Ash Wilson]

• Better handling for unconfigured GSM modem. [Ash Wilson]

• Improving messaging around caught exceptions. [Ash Wilson]

• Informative failure message when GSM modem is unconfigured. [Ash Wilson]

• Broader exception handling to catch JSON decode errors. [Ash Wilson]

• Fixes #19 by adding a limited iteration routine to open serial port for GSM modem. [Ash Wilson]

• Adding log type support for GeoIP. [Ash Wilson]

• Adding a wait to give serial device time to open. [Ash Wilson]

• Aligning pure python log shipping method. [Ash Wilson]

• Fixing data type issue (tuple to list) for some enriched scans. [Ash Wilson]

• Adding better error handling to runner/enricher. [Ash Wilson]

• Added note for improving device detection. [Ash Wilson]

• Caps, caps, caps. [Ash Wilson]

• Correcting old reference in routine that builds logstash config. [Ash Wilson]

• Correcting bad var type for inbound crypto material in ConfigHelper() [Ash Wilson]

• Correcting old varname for vault path. [Ash Wilson]

• Correcting lack of crypto ramdisk base path. [Ash Wilson]

• Correcting vars in config object. [Ash Wilson]

• Adding initialization message to device detector. [Ash Wilson]

• Fixing bad ordering in config initialization process. [Ash Wilson]

• Better filtering before GPS fix yield. [Ash Wilson]

• Less crap in the GPS feed, we hope. [Ash Wilson]

• Try to resolve a potential race condition and let gpsd have a few seconds to go live. [Ash Wilson]

• Revving to Ubuntu 16 for newer Python version. [Ash Wilson]

• Better wiring for the device autodetect feature. [Ash Wilson]

• Better wiring for the device autodetect feature. [Ash Wilson]

• Better wiring for the device autodetect feature. [Ash Wilson]

• Minor correction on how gps3 is called. [Ash Wilson]

• Changing over to gps3. [Ash Wilson]

• Wiring up GPS listener. [Ash Wilson]

• Fixing bad variable ref for GPS device. [Ash Wilson]

• Connecting the dots for gps global var. [Ash Wilson]

• Fixing try/except block. [Ash Wilson]

• Taking a stab at GPS devices. [Ash Wilson]

• Changing Logstash to use client authentication. [Ash Wilson]

• Breaking Kalibrate enricher to separate submodule. [Ash Wilson]

• No more auto DL of feed, static as fixtures. Increasing travis testing routine coverage. [Ash Wilson]

• Fixes for unit tests. [Ash Wilson]

• Refactoring enricher component - WIP. [Ash Wilson]

• Adding GeoIp module. [Ash Wilson]

• Renaming sim808 and fona modules, adding Travis config. [Ash Wilson]

• Adding GPSD functionality. [Ash Wilson]

• Adding DeviceDetector class. [Ash Wilson]

• README corrections. [Ash Wilson]

• Correcting README. [Ash Wilson]

• Improving README. [Ash Wilson]

• Testing and contribution documentation. [Ash Wilson]

• README improvements. [Ash Wilson]

• Initial commit. [Ash Wilson]

• Kal enrich returns scan even if no towers found. [Ash Wilson]

• Corrected shite logic that didn't reset primary BTS. [Ash Wilson]

• Adding ARFCN to anomaly messaging. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Fixed missing attribute in kal scan document. [Ash Wilson]

• Adding more meaningful errors to kal enricher. [Ash Wilson]

• Unfluning some bad queing logic. [Ash Wilson]

• Reduced verbosity of logger, fixed data structure for kal channels. [Ash Wilson]

• Fixed bad lat/lon formatting. [Ash Wilson]

• Cleaning up verbosity. [Ash Wilson]

• Cleaning up location acquisition. [Ash Wilson]

• Added log type for sitch_alert. [Ash Wilson]

• Better handling of device output in sim808, fix timedelta calc for enricher. [Ash Wilson]

• Cutting out unneeded feed manager thread. [Ash Wilson]

• Refactor for better imports. [Ash Wilson]

• Another forgotten import corrected. [Ash Wilson]

• Correcting missed import for FeedManager. [Ash Wilson]

• Dumb, dumb, dumb. [Ash Wilson]

• Debug messaging. [Ash Wilson]

• Testing messages for enricher. [Ash Wilson]

• Fixing syntax error in alert suppression logic. [Ash Wilson]

• Commit with waay more testing, alerts, geo, feed. [Ash Wilson]

• Testing feed... [Ash Wilson]

• Adding sensor public IP to scan output. [Ash Wilson]

• Getting the band back together. [Ash Wilson]

• More tweaks to channel field names. [Ash Wilson]

• Change output format for channel items. [Ash Wilson]

• Fixing output json formatting. [Ash Wilson]

• Rewiring scan_location to make room for GPS coords. [Ash Wilson]

• Changing to match indexes. [Ash Wilson]

• Adding some time for the FS to sync before kicking the daemons. [Ash Wilson]

• Fixing logstash forwarder startup routine. [Ash Wilson]

• Fixing cert formatting. [Ash Wilson]

• Cleanup, re-implement logstash daemon. [Ash Wilson]

• Troubleshooting log emission. [Ash Wilson]

• Fixing logstash emitter. [Ash Wilson]

• Cleaning up logger. [Ash Wilson]

• Getting to the logger now, HOOOOAH. [Ash Wilson]

• Fixing kal enricher. [Ash Wilson]

• Fixing retval handling for enricher. [Ash Wilson]

• Fixing bad method calls. [Ash Wilson]

• Cleaning up enricher. [Ash Wilson]

• Stripping out the list. [Ash Wilson]

• Fixing bad type assignment. [Ash Wilson]

• More verbose logging. [Ash Wilson]

• Fixing syntax in SIM808 module. [Ash Wilson]

• Fixing references in logger. [Ash Wilson]

• Manual build of logstash handler. [Ash Wilson]

• Manual build of logstash handler. [Ash Wilson]

• Manual build of logstash handler. [Ash Wilson]

• Fix bad spelling. [Ash Wilson]

• Disable cron and logstash. [Ash Wilson]

• Fixing syntax. [Ash Wilson]

• Heartbeat logging. [Ash Wilson]

• Commenting out thread revival. [Ash Wilson]

• Attempting to isolate lockup. [Ash Wilson]

• Logger correction. [Ash Wilson]

• Logger correction. [Ash Wilson]

• Adding log streamer. [Ash Wilson]

• Adding log streamer. [Ash Wilson]

• Adding a clutch function. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Cleanup, improve testing. [Ash Wilson]

• Changing logging. [Ash Wilson]

• Changing logging. [Ash Wilson]

• Refactor, tests. [Ash Wilson]

• Fix in init. [Ash Wilson]

• Restructure. [Ash Wilson]

• Simplify things. [Ash Wilson]

• Donwzo. [Ash Wilson]

• Whatevs. [Ash Wilson]

• Good night. [Ash Wilson]

• Whatevs. [Ash Wilson]

• Whatevs. [Ash Wilson]

• Getting tired. bedtime. [Ash Wilson]

• Getting tired. bedtime. [Ash Wilson]

• Dammmit. [Ash Wilson]

• Adding messaging. [Ash Wilson]

• Adding messaging. [Ash Wilson]

• Testing. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Cleanup enricher. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Testing. [Ash Wilson]

• Testing. [Ash Wilson]

• Cleanup. [Ash Wilson]

• Whatevs. [Ash Wilson]

• Fna. [Ash Wilson]

• Blah whatever. [Ash Wilson]

• Blah whatever. [Ash Wilson]

• Blah whatever. [Ash Wilson]

• More testing. [Ash Wilson]

• More output work. [Ash Wilson]

• Fix sim808 output format. [Ash Wilson]

• Bad syntax booooo. [Ash Wilson]

• Bad syntax booooo. [Ash Wilson]

• Bad syntax booooo. [Ash Wilson]

• Massaging GSM output. [Ash Wilson]

• Using GPS on board now. [Ash Wilson]

• Using GPS on board now. [Ash Wilson]

• Using GPS on board now. [Ash Wilson]

• Using GPS on board now. [Ash Wilson]

• Using GPS on board now. [Ash Wilson]

• GPS stuff. [Ash Wilson]

• Refining SIM808. [Ash Wilson]

• Refining SIM808. [Ash Wilson]

• Refining SIM808. [Ash Wilson]

• Better output formatting. [Ash Wilson]

• Better output formatting. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Sio crapp. [Ash Wilson]

• Fixong config helper. [Ash Wilson]

• Hacking on serial. [Ash Wilson]

• Hacking on serial. [Ash Wilson]

• Unicode to raw string. [Ash Wilson]

• Serial module work. [Ash Wilson]

• More output fixing. [Ash Wilson]

• No returns. [Ash Wilson]

• More massaging. [Ash Wilson]

• Tweaking output thread. [Ash Wilson]

• Blah blah output queue. [Ash Wilson]

• Blah blah output queue. [Ash Wilson]

• More messaging for logger. [Ash Wilson]

• Messaging in Runner. [Ash Wilson]

• Fising enricher. [Ash Wilson]

• Logging for sim808. [Ash Wilson]

• Fix kal perms. [Ash Wilson]

• Fixing ref to kal gain. [Ash Wilson]

• Fixing ref to utility obj. [Ash Wilson]

• Fixing platform info. [Ash Wilson]

• Fixing runner mishaps. [Ash Wilson]

• Fix ref to kal consumer. [Ash Wilson]

• Fix ref to crontab. [Ash Wilson]

• Adding kmod package. [Ash Wilson]

• Fixing mode for ls forwarder. [Ash Wilson]

• Figure out logstash no starty. [Ash Wilson]

• Fix reference to config file builders. [Ash Wilson]

• Fix reference to config file builders. [Ash Wilson]

• Fix reference to config file builders. [Ash Wilson]

• Fix reference to config file builders. [Ash Wilson]

• Fix reference to config file builders. [Ash Wilson]

• Fixing path mgmt. [Ash Wilson]

• Fixing dir creation. [Ash Wilson]

• Fixing dir creation. [Ash Wilson]

• Fixing dir creation. [Ash Wilson]

• Fix cert stuff. [Ash Wilson]

• Fix cert stuff. [Ash Wilson]

• Fix cert stuff. [Ash Wilson]

• Runner ref to config fix. [Ash Wilson]

• Runner ref to config fix. [Ash Wilson]

• Haggling with config helper. [Ash Wilson]

• Haggling with config helper. [Ash Wilson]

• Haggling with config helper. [Ash Wilson]

• Fising vault interaction. [Ash Wilson]

• Fising vault interaction. [Ash Wilson]

• Fising vault interaction. [Ash Wilson]

• Fix config helper. [Ash Wilson]

• Fix config helper. [Ash Wilson]

• Fixing config init. [Ash Wilson]

• Fixing ref to vault path. [Ash Wilson]

• Fis syntaxes. [Ash Wilson]

• Cleaning up CMD. [Ash Wilson]

• Fixing instantiation of config. [Ash Wilson]

• Fixing deque name. [Ash Wilson]

• Venv shit. [Ash Wilson]

• Venv shit. [Ash Wilson]

• Venv settings tweak. [Ash Wilson]

• Venv settings tweak. [Ash Wilson]

• Venv settings tweak. [Ash Wilson]

• Venv settings tweak. [Ash Wilson]

• Inching closer. [Ash Wilson]

• Rearranging. [Ash Wilson]

• More testing. [Ash Wilson]

• More testing. [Ash Wilson]

• More testing. [Ash Wilson]

• More testing. [Ash Wilson]

• Please just work. [Ash Wilson]

• Fixing Dockerfile venv config. [Ash Wilson]

• Fixing Dockerfile and missing imports. [Ash Wilson]

• Fixing Dockerfile and missing imports. [Ash Wilson]

• Fixing Dockerfile and missing imports. [Ash Wilson]

• Fixing Dockerfile and missing imports. [Ash Wilson]

• Fixing Dockerfile and missing imports. [Ash Wilson]

• Changing source image. [Ash Wilson]

• Changing source image. [Ash Wilson]

• Changing source image. [Ash Wilson]

• Dockerfile tweaks. [Ash Wilson]

• Dockerfile tweaks. [Ash Wilson]

• Fixing dockerfile again. [Ash Wilson]

• Fixed Dockerfile. [Ash Wilson]

• Squashing lots of things. [Ash Wilson]

• First release for DEF CON. [Ash Wilson]

v2.0 (2016-07-25)

Other

• Ready for Def Con. [Ash Wilson]

• First commit of all the things. [Ash Wilson]