Uploader "fixes" g-code

[PanderPeter]

Just found out that the Uploader changes "fixes" the g-code where it is not neccessary imo.

test-original.txt
test-sm2uploader.txt
test-luban_4.14.0.txt

I sliced with PS 2.9.0, used multi extruder setup and on print settings > multi extruder > prime all printing extruders.
The fixed code is in file test-sm2uploader.txt at line 1963. Also attached the same file uploaded with luban, where there is no "fixing g-code"