From 1db53d7a93f60cd2e3137fd6720448dd71bf41c9 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Thu, 9 Dec 2021 08:51:03 -0600 Subject: [PATCH] Update README.asciidoc Stop/Start lowpan.service between cc2538-bsl.py updates --- README.asciidoc | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/README.asciidoc b/README.asciidoc index f08c111..b4d2038 100644 --- a/README.asciidoc +++ b/README.asciidoc @@ -657,11 +657,13 @@ Do this from the BeagleBone Green Gateway board that was previously used to prog 1. Disconnect the BeagleConnect Freedom gateway device 2. Connect a new BeagleConnect Freedom board via USB -3. `cc2538-bsl.py /usr/share/beagleconnect/cc1352/greybus_mikrobus_beagleconnect.bin /dev/ttyACM0` -4. After it finishes programming successfully, disconnect the BeagleConnect Freedom node device -5. Power the newly programmed BeagleConnect Freedom node device from an alternate USB power source -6. Reconnect the BeagleConnect Freedom gateway device to the BeagleBone Green Gateway -7. `sudo beagleconnect-start-gateway` +3. `sudo systemctl stop lowpan.service` +4. `cc2538-bsl.py /usr/share/beagleconnect/cc1352/greybus_mikrobus_beagleconnect.bin /dev/ttyACM0` +5. `sudo systemctl start lowpan.service` +6. After it finishes programming successfully, disconnect the BeagleConnect Freedom node device +7. Power the newly programmed BeagleConnect Freedom node device from an alternate USB power source +8. Reconnect the BeagleConnect Freedom gateway device to the BeagleBone Green Gateway +9. `sudo beagleconnect-start-gateway` #TODO: update the below for the built-in sensors