Failed tests for step10_multiapps tutorial: auxkernels/corrosion EXODIFF #28874

smpeyres · 2024-10-17T15:01:36Z

smpeyres
Oct 17, 2024

Check these boxes if you have followed the posting rules.

I have consulted the Posting Guidelines.
I have searched the Discussions Forum and MOOSE Framework Troubleshooting and have not found what I was looking for
Q&A Getting Started is the most appropriate category for my question (trouble installing, beginner user, ...)

Issue or question about MOOSE

I am working through the darcy_thermo_mech tutorials and I am currently on step10_multiapps. Compilation with make -j8 works just fine on Apple Silicon M1. However, when I perform ./run_tests -j8, it reports that two tests, both for tests/auxkernels/corrosion fail with EXODIFF while the other eight tests pass.

I also tried the -j4 equivalents with the same results and diagnostics.sh passed all checks.

Any thoughts?

(Optional) code in question / simulation log / errors

auxkernels/velocity_aux.test .............................................................................. OK
kernels/simple_diffusion.test ............................................................................. OK
kernels/darcy_pressure.test ............................................................................... OK
bcs/outflow.test .......................................................................................... OK
materials/packed_column.test .............................................................................. OK
kernels/darcy_advection.test .............................................................................. OK
auxkernels/corrosion.default: Working Directory: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion
auxkernels/corrosion.default: Running command: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/darcy_thermo_mech-opt -i corrosion.i --error --error-override --libtorch-device cpu
auxkernels/corrosion.default: The following total 1 aux variables:
auxkernels/corrosion.default:   porosity
auxkernels/corrosion.default: are added for automatic output by MaterialOutputAction.
auxkernels/corrosion.default: 
auxkernels/corrosion.default: 
auxkernels/corrosion.default: *** Info ***
auxkernels/corrosion.default: 'execute_on' parameter specified in [Outputs] block is ignored for object 'checkpoint'.
auxkernels/corrosion.default: Define this object in its own sub-block of [Outputs] to modify its execution schedule.
auxkernels/corrosion.default: Framework Information:
auxkernels/corrosion.default: MOOSE Version:           git commit 2ec280afc3 on 2024-10-15
auxkernels/corrosion.default: LibMesh Version:         
auxkernels/corrosion.default: PETSc Version:           3.21.5
auxkernels/corrosion.default: SLEPc Version:           3.21.1
auxkernels/corrosion.default: Current Time:            Thu Oct 17 09:50:44 2024
auxkernels/corrosion.default: Executable Timestamp:    Thu Oct 17 09:50:35 2024
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Checkpoint:
auxkernels/corrosion.default:   Wall Time Interval:      Every 3600 s
auxkernels/corrosion.default:   User Checkpoint:         Disabled
auxkernels/corrosion.default:   # Checkpoints Kept:      2
auxkernels/corrosion.default:   Execute On:              TIMESTEP_END 
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Parallelism:
auxkernels/corrosion.default:   Num Processors:          1
auxkernels/corrosion.default:   Num Threads:             1
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh: 
auxkernels/corrosion.default:   Parallel Type:           replicated
auxkernels/corrosion.default:   Mesh Dimension:          2
auxkernels/corrosion.default:   Spatial Dimension:       2
auxkernels/corrosion.default:   Nodes:                   121
auxkernels/corrosion.default:   Elems:                   100
auxkernels/corrosion.default:   Num Subdomains:          1
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Nonlinear System:
auxkernels/corrosion.default:   Num DOFs:                121
auxkernels/corrosion.default:   Num Local DOFs:          121
auxkernels/corrosion.default:   Variables:               "temperature" 
auxkernels/corrosion.default:   Finite Element Types:    "LAGRANGE" 
auxkernels/corrosion.default:   Approximation Orders:    "FIRST" 
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Auxiliary System:
auxkernels/corrosion.default:   Num DOFs:                421
auxkernels/corrosion.default:   Num Local DOFs:          421
auxkernels/corrosion.default:   Variables:               "phi" { "phi_jump" "error_marker" "porosity" } 
auxkernels/corrosion.default:   Finite Element Types:    "LAGRANGE" "MONOMIAL" 
auxkernels/corrosion.default:   Approximation Orders:    "FIRST" "CONSTANT" 
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Execution Information:
auxkernels/corrosion.default:   Executioner:             Transient
auxkernels/corrosion.default:   TimeStepper:             ConstantDT
auxkernels/corrosion.default:   TimeIntegrator:          ImplicitEuler
auxkernels/corrosion.default:   Solver Mode:             Preconditioned JFNK
auxkernels/corrosion.default:   PETSc Preconditioner:    hypre boomeramg 
auxkernels/corrosion.default: 
auxkernels/corrosion.default: LEGACY MODES ENABLED:
auxkernels/corrosion.default:  This application uses the legacy initial residual evaluation behavior. The legacy behavior performs an often times redundant residual evaluation before the solution modifying objects are executed prior to the initial (0th nonlinear iteration) residual evaluation. The new behavior skips that redundant residual evaluation unless the parameter Executioner/use_pre_smo_residual is set to true. To remove this message and enable the new behavior, set the parameter 'use_legacy_initial_residual_evaluation_behavior' to false in *App.C. Some tests that rely on the side effects of the legacy behavior may fail/diff and should be re-golded.
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 0, time = 0
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 1, time = 0.5, dt = 0.5
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   0.000000e+00 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Pre-SMO residual: 8.34369
auxkernels/corrosion.default:  0 Nonlinear |R| = 8.343691e+00
auxkernels/corrosion.default:       0 Linear |R| = 8.343691e+00
auxkernels/corrosion.default:       1 Linear |R| = 1.549240e+00
auxkernels/corrosion.default:       2 Linear |R| = 8.001529e-02
auxkernels/corrosion.default:       3 Linear |R| = 7.350995e-03
auxkernels/corrosion.default:       4 Linear |R| = 4.792750e-04
auxkernels/corrosion.default:       5 Linear |R| = 2.999320e-05
auxkernels/corrosion.default:  1 Nonlinear |R| = 1.870387e-03
auxkernels/corrosion.default:       0 Linear |R| = 1.870387e-03
auxkernels/corrosion.default:       1 Linear |R| = 1.043748e-05
auxkernels/corrosion.default:       2 Linear |R| = 8.783022e-07
auxkernels/corrosion.default:       3 Linear |R| = 5.432982e-08
auxkernels/corrosion.default:       4 Linear |R| = 3.631349e-09
auxkernels/corrosion.default:  2 Nonlinear |R| = 6.193530e-09
auxkernels/corrosion.default:  Solve Converged!
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 2, time = 1, dt = 0.5
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.254934e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Pre-SMO residual: 0.261142
auxkernels/corrosion.default:  0 Nonlinear |R| = 2.611419e-01
auxkernels/corrosion.default:       0 Linear |R| = 2.611419e-01
auxkernels/corrosion.default:       1 Linear |R| = 6.505193e-03
auxkernels/corrosion.default:       2 Linear |R| = 2.408524e-04
auxkernels/corrosion.default:       3 Linear |R| = 1.879679e-05
auxkernels/corrosion.default:       4 Linear |R| = 1.500252e-06
auxkernels/corrosion.default:  1 Nonlinear |R| = 2.530532e-06
auxkernels/corrosion.default:       0 Linear |R| = 2.530532e-06
auxkernels/corrosion.default:       1 Linear |R| = 1.901748e-07
auxkernels/corrosion.default:       2 Linear |R| = 1.081525e-08
auxkernels/corrosion.default:       3 Linear |R| = 6.283127e-10
auxkernels/corrosion.default:       4 Linear |R| = 3.100480e-11
auxkernels/corrosion.default:       5 Linear |R| = 1.666475e-12
auxkernels/corrosion.default:  2 Nonlinear |R| = 4.192184e-10
auxkernels/corrosion.default:  Solve Converged!
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 3, time = 1.5, dt = 0.5
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Pre-SMO residual: 0.258737
auxkernels/corrosion.default:  0 Nonlinear |R| = 2.587373e-01
auxkernels/corrosion.default:       0 Linear |R| = 2.587373e-01
auxkernels/corrosion.default:       1 Linear |R| = 6.307993e-03
auxkernels/corrosion.default:       2 Linear |R| = 2.068094e-04
auxkernels/corrosion.default:       3 Linear |R| = 2.099996e-05
auxkernels/corrosion.default:       4 Linear |R| = 1.496631e-06
auxkernels/corrosion.default:  1 Nonlinear |R| = 2.826520e-06
auxkernels/corrosion.default:       0 Linear |R| = 2.826520e-06
auxkernels/corrosion.default:       1 Linear |R| = 2.031846e-07
auxkernels/corrosion.default:       2 Linear |R| = 1.365544e-08
auxkernels/corrosion.default:       3 Linear |R| = 7.915748e-10
auxkernels/corrosion.default:       4 Linear |R| = 3.783316e-11
auxkernels/corrosion.default:       5 Linear |R| = 2.478907e-12
auxkernels/corrosion.default:  2 Nonlinear |R| = 4.763928e-10
auxkernels/corrosion.default:  Solve Converged!
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 4, time = 2, dt = 0.5
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: |   2.000000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Pre-SMO residual: 0.272895
auxkernels/corrosion.default:  0 Nonlinear |R| = 2.728950e-01
auxkernels/corrosion.default:       0 Linear |R| = 2.728950e-01
auxkernels/corrosion.default:       1 Linear |R| = 6.991910e-03
auxkernels/corrosion.default:       2 Linear |R| = 2.175259e-04
auxkernels/corrosion.default:       3 Linear |R| = 1.805618e-05
auxkernels/corrosion.default:       4 Linear |R| = 1.138326e-06
auxkernels/corrosion.default:  1 Nonlinear |R| = 2.674962e-06
auxkernels/corrosion.default:       0 Linear |R| = 2.674962e-06
auxkernels/corrosion.default:       1 Linear |R| = 1.508168e-07
auxkernels/corrosion.default:       2 Linear |R| = 8.990648e-09
auxkernels/corrosion.default:       3 Linear |R| = 5.311757e-10
auxkernels/corrosion.default:       4 Linear |R| = 3.985200e-11
auxkernels/corrosion.default:       5 Linear |R| = 3.149307e-12
auxkernels/corrosion.default:  2 Nonlinear |R| = 2.454356e-10
auxkernels/corrosion.default:  Solve Converged!
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: |   2.000000e+00 |   1.243065e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Time Step 5, time = 2.5, dt = 0.5
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: |   2.000000e+00 |   1.243065e+01 |
auxkernels/corrosion.default: |   2.500000e+00 |   1.243065e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Pre-SMO residual: 0.242195
auxkernels/corrosion.default:  0 Nonlinear |R| = 2.421952e-01
auxkernels/corrosion.default:       0 Linear |R| = 2.421952e-01
auxkernels/corrosion.default:       1 Linear |R| = 5.958176e-03
auxkernels/corrosion.default:       2 Linear |R| = 1.948871e-04
auxkernels/corrosion.default:       3 Linear |R| = 1.259206e-05
auxkernels/corrosion.default:       4 Linear |R| = 1.210143e-06
auxkernels/corrosion.default:  1 Nonlinear |R| = 2.099531e-06
auxkernels/corrosion.default:       0 Linear |R| = 2.099531e-06
auxkernels/corrosion.default:       1 Linear |R| = 1.960142e-07
auxkernels/corrosion.default:       2 Linear |R| = 8.996727e-09
auxkernels/corrosion.default:       3 Linear |R| = 4.706163e-10
auxkernels/corrosion.default:       4 Linear |R| = 2.283691e-11
auxkernels/corrosion.default:       5 Linear |R| = 1.299604e-12
auxkernels/corrosion.default:  2 Nonlinear |R| = 4.683512e-10
auxkernels/corrosion.default:  Solve Converged!
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Postprocessor Values:
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: | time           | k_eff          |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.default: |   1.000000e+00 |   1.250955e+01 |
auxkernels/corrosion.default: |   1.500000e+00 |   1.247105e+01 |
auxkernels/corrosion.default: |   2.000000e+00 |   1.243065e+01 |
auxkernels/corrosion.default: |   2.500000e+00 |   1.239742e+01 |
auxkernels/corrosion.default: +----------------+----------------+
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Running exodiff: /Users/seanpeyres/moose-projects/moose/framework/contrib/exodiff/exodiff -m  -F 1e-10 -t 5.5e-06  /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/gold/corrosion_out.e-s005 /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/corrosion_out.e-s005
auxkernels/corrosion.default: ERROR: 
auxkernels/corrosion.default:    *****************************************************************
auxkernels/corrosion.default:               EXODIFF	(Version: 2.90) Modified: 2018-02-15
auxkernels/corrosion.default:               Authors:  Richard Drake, [email protected]           
auxkernels/corrosion.default:                         Greg Sjaardema, [email protected]          
auxkernels/corrosion.default:               Run on    2024/10/17   09:50:48 CDT
auxkernels/corrosion.default:    *****************************************************************
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Reading first file ... 
auxkernels/corrosion.default: Reading second file ... 
auxkernels/corrosion.default:   FILE 1: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/gold/corrosion_out.e-s005
auxkernels/corrosion.default:    Title: corrosion_out.e-s005
auxkernels/corrosion.default:           Dim = 2, Blocks = 1, Nodes = 5538, Elements = 5161, Nodesets = 4, Sidesets = 4
auxkernels/corrosion.default:           Vars: Global = 1, Nodal = 2, Element = 3, Nodeset = 0, Sideset = 0, Times = 1
auxkernels/corrosion.default: 
auxkernels/corrosion.default:   FILE 2: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/corrosion_out.e-s005
auxkernels/corrosion.default:    Title: corrosion_out.e-s005
auxkernels/corrosion.default:           Dim = 2, Blocks = 1, Nodes = 5538, Elements = 5161, Nodesets = 4, Sidesets = 4
auxkernels/corrosion.default:           Vars: Global = 1, Nodal = 2, Element = 3, Nodeset = 0, Sideset = 0, Times = 1
auxkernels/corrosion.default: 
auxkernels/corrosion.default: exodiff: INFO .. Map option is not needed.
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Nodal coordinates will be compared .. tol:    1e-06 (absolute), floor:        0
auxkernels/corrosion.default: Time step values will be compared .. tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.default: Global variables to be compared:
auxkernels/corrosion.default: 	k_eff                            tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.default: Nodal variables to be compared:
auxkernels/corrosion.default: 	phi                              tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.default: 	temperature                            5.5e-06 (relative),           1e-10
auxkernels/corrosion.default: Element variables to be compared:
auxkernels/corrosion.default: 	phi_jump                         tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.default: 	error_marker                           5.5e-06 (relative),           1e-10
auxkernels/corrosion.default: 	porosity                               5.5e-06 (relative),           1e-10
auxkernels/corrosion.default: No Element Attribute variables on either file.
auxkernels/corrosion.default: No Nodeset variables on either file.
auxkernels/corrosion.default: No Sideset variables on either file.
auxkernels/corrosion.default: Sideset Distribution Factors will be compared .. tol:    1e-06 (relative), floor:        0
auxkernels/corrosion.default: 
auxkernels/corrosion.default:   ==============================================================
auxkernels/corrosion.default:   NOTE: All node and element ids are reported as global ids.
auxkernels/corrosion.default: 
auxkernels/corrosion.default: Sideset Distribution Factors:
auxkernels/corrosion.default:   --------- Time step 1, 2.5000000e+00 ~ 2.5000000e+00, rel diff:  0.00000e+00 ---------
auxkernels/corrosion.default: Global variables:
auxkernels/corrosion.default:    k_eff  rel diff:  1.2393210e+01 ~  1.2397415e+01 = 3.39164e-04 (FAILED)
auxkernels/corrosion.default: Nodal variables:
auxkernels/corrosion.default:    phi          rel diff:  0.0000000e+00 ~  1.0000000e+00 = 1.00000e+00 (node 2)
auxkernels/corrosion.default:    temperature  rel diff:  3.0173049e+02 ~  3.0172747e+02 = 1.00295e-05 (node 2054)
auxkernels/corrosion.default: Element variables:
auxkernels/corrosion.default:    phi_jump      rel diff:  1.1892071e+00 ~  6.8658905e-01 = 4.22650e-01 (block 0, elmt 2124)
auxkernels/corrosion.default:    porosity      rel diff:  5.0000000e-01 ~  2.5000000e-01 = 5.00000e-01 (block 0, elmt 2341)
auxkernels/corrosion.default: 
auxkernels/corrosion.default: exodiff: Files are different
auxkernels/corrosion.default: 
auxkernels/corrosion.default:  
auxkernels/corrosion.default: ################################################################################
auxkernels/corrosion.default: Tester failed, reason: EXODIFF
auxkernels/corrosion.default: 
auxkernels/corrosion.default ................................................................ FAILED (EXODIFF)
problems.step_a .............................................................................. [min_cpus=3] OK
auxkernels/corrosion.temp_dep: Working Directory: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion
auxkernels/corrosion.temp_dep: Running command: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/darcy_thermo_mech-opt -i corrosion.i AuxKernels/corrosion/temperature=350 Outputs/file_base=corrosion_temp_dep --error --error-override --libtorch-device cpu
auxkernels/corrosion.temp_dep: The following total 1 aux variables:
auxkernels/corrosion.temp_dep:   porosity
auxkernels/corrosion.temp_dep: are added for automatic output by MaterialOutputAction.
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: *** Info ***
auxkernels/corrosion.temp_dep: 'execute_on' parameter specified in [Outputs] block is ignored for object 'checkpoint'.
auxkernels/corrosion.temp_dep: Define this object in its own sub-block of [Outputs] to modify its execution schedule.
auxkernels/corrosion.temp_dep: Framework Information:
auxkernels/corrosion.temp_dep: MOOSE Version:           git commit 2ec280afc3 on 2024-10-15
auxkernels/corrosion.temp_dep: LibMesh Version:         
auxkernels/corrosion.temp_dep: PETSc Version:           3.21.5
auxkernels/corrosion.temp_dep: SLEPc Version:           3.21.1
auxkernels/corrosion.temp_dep: Current Time:            Thu Oct 17 09:50:48 2024
auxkernels/corrosion.temp_dep: Executable Timestamp:    Thu Oct 17 09:50:35 2024
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Checkpoint:
auxkernels/corrosion.temp_dep:   Wall Time Interval:      Every 3600 s
auxkernels/corrosion.temp_dep:   User Checkpoint:         Disabled
auxkernels/corrosion.temp_dep:   # Checkpoints Kept:      2
auxkernels/corrosion.temp_dep:   Execute On:              TIMESTEP_END 
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Parallelism:
auxkernels/corrosion.temp_dep:   Num Processors:          1
auxkernels/corrosion.temp_dep:   Num Threads:             1
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh: 
auxkernels/corrosion.temp_dep:   Parallel Type:           replicated
auxkernels/corrosion.temp_dep:   Mesh Dimension:          2
auxkernels/corrosion.temp_dep:   Spatial Dimension:       2
auxkernels/corrosion.temp_dep:   Nodes:                   121
auxkernels/corrosion.temp_dep:   Elems:                   100
auxkernels/corrosion.temp_dep:   Num Subdomains:          1
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Nonlinear System:
auxkernels/corrosion.temp_dep:   Num DOFs:                121
auxkernels/corrosion.temp_dep:   Num Local DOFs:          121
auxkernels/corrosion.temp_dep:   Variables:               "temperature" 
auxkernels/corrosion.temp_dep:   Finite Element Types:    "LAGRANGE" 
auxkernels/corrosion.temp_dep:   Approximation Orders:    "FIRST" 
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Auxiliary System:
auxkernels/corrosion.temp_dep:   Num DOFs:                421
auxkernels/corrosion.temp_dep:   Num Local DOFs:          421
auxkernels/corrosion.temp_dep:   Variables:               "phi" { "phi_jump" "error_marker" "porosity" } 
auxkernels/corrosion.temp_dep:   Finite Element Types:    "LAGRANGE" "MONOMIAL" 
auxkernels/corrosion.temp_dep:   Approximation Orders:    "FIRST" "CONSTANT" 
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Execution Information:
auxkernels/corrosion.temp_dep:   Executioner:             Transient
auxkernels/corrosion.temp_dep:   TimeStepper:             ConstantDT
auxkernels/corrosion.temp_dep:   TimeIntegrator:          ImplicitEuler
auxkernels/corrosion.temp_dep:   Solver Mode:             Preconditioned JFNK
auxkernels/corrosion.temp_dep:   PETSc Preconditioner:    hypre boomeramg 
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: LEGACY MODES ENABLED:
auxkernels/corrosion.temp_dep:  This application uses the legacy initial residual evaluation behavior. The legacy behavior performs an often times redundant residual evaluation before the solution modifying objects are executed prior to the initial (0th nonlinear iteration) residual evaluation. The new behavior skips that redundant residual evaluation unless the parameter Executioner/use_pre_smo_residual is set to true. To remove this message and enable the new behavior, set the parameter 'use_legacy_initial_residual_evaluation_behavior' to false in *App.C. Some tests that rely on the side effects of the legacy behavior may fail/diff and should be re-golded.
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 0, time = 0
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 1, time = 0.5, dt = 0.5
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   0.000000e+00 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Pre-SMO residual: 8.34369
auxkernels/corrosion.temp_dep:  0 Nonlinear |R| = 8.343691e+00
auxkernels/corrosion.temp_dep:       0 Linear |R| = 8.343691e+00
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.549240e+00
auxkernels/corrosion.temp_dep:       2 Linear |R| = 8.001529e-02
auxkernels/corrosion.temp_dep:       3 Linear |R| = 7.350995e-03
auxkernels/corrosion.temp_dep:       4 Linear |R| = 4.792750e-04
auxkernels/corrosion.temp_dep:       5 Linear |R| = 2.999320e-05
auxkernels/corrosion.temp_dep:  1 Nonlinear |R| = 1.870387e-03
auxkernels/corrosion.temp_dep:       0 Linear |R| = 1.870387e-03
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.043748e-05
auxkernels/corrosion.temp_dep:       2 Linear |R| = 8.783022e-07
auxkernels/corrosion.temp_dep:       3 Linear |R| = 5.432982e-08
auxkernels/corrosion.temp_dep:       4 Linear |R| = 3.631349e-09
auxkernels/corrosion.temp_dep:  2 Nonlinear |R| = 6.193530e-09
auxkernels/corrosion.temp_dep:  Solve Converged!
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 2, time = 1, dt = 0.5
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Pre-SMO residual: 0.615038
auxkernels/corrosion.temp_dep:  0 Nonlinear |R| = 6.150376e-01
auxkernels/corrosion.temp_dep:       0 Linear |R| = 6.150376e-01
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.454644e-02
auxkernels/corrosion.temp_dep:       2 Linear |R| = 6.488325e-04
auxkernels/corrosion.temp_dep:       3 Linear |R| = 5.991634e-05
auxkernels/corrosion.temp_dep:       4 Linear |R| = 2.954481e-06
auxkernels/corrosion.temp_dep:  1 Nonlinear |R| = 1.170857e-05
auxkernels/corrosion.temp_dep:       0 Linear |R| = 1.170857e-05
auxkernels/corrosion.temp_dep:       1 Linear |R| = 3.895838e-07
auxkernels/corrosion.temp_dep:       2 Linear |R| = 2.231283e-08
auxkernels/corrosion.temp_dep:       3 Linear |R| = 1.670949e-09
auxkernels/corrosion.temp_dep:       4 Linear |R| = 1.110127e-10
auxkernels/corrosion.temp_dep:  2 Nonlinear |R| = 3.747580e-10
auxkernels/corrosion.temp_dep:  Solve Converged!
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 3, time = 1.5, dt = 0.5
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Pre-SMO residual: 0.569329
auxkernels/corrosion.temp_dep:  0 Nonlinear |R| = 5.693288e-01
auxkernels/corrosion.temp_dep:       0 Linear |R| = 5.693288e-01
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.489655e-02
auxkernels/corrosion.temp_dep:       2 Linear |R| = 6.584955e-04
auxkernels/corrosion.temp_dep:       3 Linear |R| = 5.981734e-05
auxkernels/corrosion.temp_dep:       4 Linear |R| = 2.678592e-06
auxkernels/corrosion.temp_dep:  1 Nonlinear |R| = 1.222642e-05
auxkernels/corrosion.temp_dep:       0 Linear |R| = 1.222642e-05
auxkernels/corrosion.temp_dep:       1 Linear |R| = 3.096470e-07
auxkernels/corrosion.temp_dep:       2 Linear |R| = 1.771201e-08
auxkernels/corrosion.temp_dep:       3 Linear |R| = 1.427478e-09
auxkernels/corrosion.temp_dep:       4 Linear |R| = 9.186501e-11
auxkernels/corrosion.temp_dep:  2 Nonlinear |R| = 3.994145e-10
auxkernels/corrosion.temp_dep:  Solve Converged!
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 4, time = 2, dt = 0.5
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: |   2.000000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Pre-SMO residual: 0.622794
auxkernels/corrosion.temp_dep:  0 Nonlinear |R| = 6.227942e-01
auxkernels/corrosion.temp_dep:       0 Linear |R| = 6.227942e-01
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.445402e-02
auxkernels/corrosion.temp_dep:       2 Linear |R| = 9.314179e-04
auxkernels/corrosion.temp_dep:       3 Linear |R| = 7.202006e-05
auxkernels/corrosion.temp_dep:       4 Linear |R| = 5.076344e-06
auxkernels/corrosion.temp_dep:  1 Nonlinear |R| = 1.327533e-05
auxkernels/corrosion.temp_dep:       0 Linear |R| = 1.327533e-05
auxkernels/corrosion.temp_dep:       1 Linear |R| = 8.379616e-07
auxkernels/corrosion.temp_dep:       2 Linear |R| = 4.705513e-08
auxkernels/corrosion.temp_dep:       3 Linear |R| = 3.571541e-09
auxkernels/corrosion.temp_dep:       4 Linear |R| = 2.077568e-10
auxkernels/corrosion.temp_dep:       5 Linear |R| = 1.278367e-11
auxkernels/corrosion.temp_dep:  2 Nonlinear |R| = 9.365078e-10
auxkernels/corrosion.temp_dep:  Solve Converged!
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: |   2.000000e+00 |   1.194816e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Mesh unchanged, skipping remaining steps...
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Time Step 5, time = 2.5, dt = 0.5
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: |   2.000000e+00 |   1.194816e+01 |
auxkernels/corrosion.temp_dep: |   2.500000e+00 |   1.194816e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Pre-SMO residual: 0.596107
auxkernels/corrosion.temp_dep:  0 Nonlinear |R| = 5.961067e-01
auxkernels/corrosion.temp_dep:       0 Linear |R| = 5.961067e-01
auxkernels/corrosion.temp_dep:       1 Linear |R| = 1.299431e-02
auxkernels/corrosion.temp_dep:       2 Linear |R| = 7.469740e-04
auxkernels/corrosion.temp_dep:       3 Linear |R| = 6.612589e-05
auxkernels/corrosion.temp_dep:       4 Linear |R| = 4.805180e-06
auxkernels/corrosion.temp_dep:  1 Nonlinear |R| = 1.047249e-05
auxkernels/corrosion.temp_dep:       0 Linear |R| = 1.047249e-05
auxkernels/corrosion.temp_dep:       1 Linear |R| = 6.500098e-07
auxkernels/corrosion.temp_dep:       2 Linear |R| = 3.799690e-08
auxkernels/corrosion.temp_dep:       3 Linear |R| = 3.327898e-09
auxkernels/corrosion.temp_dep:       4 Linear |R| = 1.875324e-10
auxkernels/corrosion.temp_dep:       5 Linear |R| = 1.579450e-11
auxkernels/corrosion.temp_dep:  2 Nonlinear |R| = 6.707149e-10
auxkernels/corrosion.temp_dep:  Solve Converged!
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Postprocessor Values:
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: | time           | k_eff          |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: |   5.000000e-01 |   1.254934e+01 |
auxkernels/corrosion.temp_dep: |   1.000000e+00 |   1.234202e+01 |
auxkernels/corrosion.temp_dep: |   1.500000e+00 |   1.215335e+01 |
auxkernels/corrosion.temp_dep: |   2.000000e+00 |   1.194816e+01 |
auxkernels/corrosion.temp_dep: |   2.500000e+00 |   1.177877e+01 |
auxkernels/corrosion.temp_dep: +----------------+----------------+
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Running exodiff: /Users/seanpeyres/moose-projects/moose/framework/contrib/exodiff/exodiff -m  -F 1e-10 -t 5.5e-06  /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/gold/corrosion_temp_dep.e-s005 /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/corrosion_temp_dep.e-s005
auxkernels/corrosion.temp_dep: ERROR: 
auxkernels/corrosion.temp_dep:    *****************************************************************
auxkernels/corrosion.temp_dep:               EXODIFF	(Version: 2.90) Modified: 2018-02-15
auxkernels/corrosion.temp_dep:               Authors:  Richard Drake, [email protected]           
auxkernels/corrosion.temp_dep:                         Greg Sjaardema, [email protected]          
auxkernels/corrosion.temp_dep:               Run on    2024/10/17   09:50:52 CDT
auxkernels/corrosion.temp_dep:    *****************************************************************
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Reading first file ... 
auxkernels/corrosion.temp_dep: Reading second file ... 
auxkernels/corrosion.temp_dep:   FILE 1: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/gold/corrosion_temp_dep.e-s005
auxkernels/corrosion.temp_dep:    Title: corrosion_temp_dep.e-s005
auxkernels/corrosion.temp_dep:           Dim = 2, Blocks = 1, Nodes = 6029, Elements = 5695, Nodesets = 4, Sidesets = 4
auxkernels/corrosion.temp_dep:           Vars: Global = 1, Nodal = 2, Element = 3, Nodeset = 0, Sideset = 0, Times = 1
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep:   FILE 2: /Users/seanpeyres/moose-projects/moose/tutorials/darcy_thermo_mech/step10_multiapps/tests/auxkernels/corrosion/corrosion_temp_dep.e-s005
auxkernels/corrosion.temp_dep:    Title: corrosion_temp_dep.e-s005
auxkernels/corrosion.temp_dep:           Dim = 2, Blocks = 1, Nodes = 6029, Elements = 5695, Nodesets = 4, Sidesets = 4
auxkernels/corrosion.temp_dep:           Vars: Global = 1, Nodal = 2, Element = 3, Nodeset = 0, Sideset = 0, Times = 1
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: exodiff: INFO .. Map option is not needed.
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Nodal coordinates will be compared .. tol:    1e-06 (absolute), floor:        0
auxkernels/corrosion.temp_dep: Time step values will be compared .. tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.temp_dep: Global variables to be compared:
auxkernels/corrosion.temp_dep: 	k_eff                            tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.temp_dep: Nodal variables to be compared:
auxkernels/corrosion.temp_dep: 	phi                              tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.temp_dep: 	temperature                            5.5e-06 (relative),           1e-10
auxkernels/corrosion.temp_dep: Element variables to be compared:
auxkernels/corrosion.temp_dep: 	phi_jump                         tol:  5.5e-06 (relative), floor:    1e-10
auxkernels/corrosion.temp_dep: 	error_marker                           5.5e-06 (relative),           1e-10
auxkernels/corrosion.temp_dep: 	porosity                               5.5e-06 (relative),           1e-10
auxkernels/corrosion.temp_dep: No Element Attribute variables on either file.
auxkernels/corrosion.temp_dep: No Nodeset variables on either file.
auxkernels/corrosion.temp_dep: No Sideset variables on either file.
auxkernels/corrosion.temp_dep: Sideset Distribution Factors will be compared .. tol:    1e-06 (relative), floor:        0
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep:   ==============================================================
auxkernels/corrosion.temp_dep:   NOTE: All node and element ids are reported as global ids.
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: Sideset Distribution Factors:
auxkernels/corrosion.temp_dep:   --------- Time step 1, 2.5000000e+00 ~ 2.5000000e+00, rel diff:  0.00000e+00 ---------
auxkernels/corrosion.temp_dep: Global variables:
auxkernels/corrosion.temp_dep:    k_eff  rel diff:  1.1774050e+01 ~  1.1778771e+01 = 4.00847e-04 (FAILED)
auxkernels/corrosion.temp_dep: Nodal variables:
auxkernels/corrosion.temp_dep:    phi          rel diff:  0.0000000e+00 ~  1.0000000e+00 = 1.00000e+00 (node 2)
auxkernels/corrosion.temp_dep:    temperature  rel diff:  3.0161014e+02 ~  3.0160516e+02 = 1.65209e-05 (node 1972)
auxkernels/corrosion.temp_dep: Element variables:
auxkernels/corrosion.temp_dep:    phi_jump      rel diff:  1.1892071e+00 ~  6.8658905e-01 = 4.22650e-01 (block 0, elmt 2124)
auxkernels/corrosion.temp_dep:    porosity      rel diff:  5.0000000e-01 ~  2.5000000e-01 = 5.00000e-01 (block 0, elmt 2341)
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep: exodiff: Files are different
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep:  
auxkernels/corrosion.temp_dep: ################################################################################
auxkernels/corrosion.temp_dep: Tester failed, reason: EXODIFF
auxkernels/corrosion.temp_dep: 
auxkernels/corrosion.temp_dep ............................................................... FAILED (EXODIFF)
problems.step_b ........................................................................................... OK


Final Test Results:
--------------------------------------------------------------------------------------------------------------
auxkernels/velocity_aux.test .............................................................................. OK
kernels/simple_diffusion.test ............................................................................. OK
kernels/darcy_pressure.test ............................................................................... OK
bcs/outflow.test .......................................................................................... OK
materials/packed_column.test .............................................................................. OK
kernels/darcy_advection.test .............................................................................. OK
problems.step_a .............................................................................. [min_cpus=3] OK
problems.step_b ........................................................................................... OK
auxkernels/corrosion.default ................................................................ FAILED (EXODIFF)
auxkernels/corrosion.temp_dep ............................................................... FAILED (EXODIFF)
--------------------------------------------------------------------------------------------------------------
Ran 10 tests in 10.0 seconds. Average test time 2.5 seconds, maximum test time 6.4 seconds.
8 passed, 0 skipped, 0 pending, 2 FAILED

Encountering Errors? Please include diagnostic output

No response

GiudGiud · 2024-10-17T15:07:16Z

GiudGiud
Oct 17, 2024
Collaborator

Hello

That's interesting. Even though you passed -j8, you actually still ran this in serial.
So this is not a parallel consistency issue, it's a problem with the test suite running out of order when running 8 tests at the same time.

I ll double check it then we'll address this, thanks for reporting.

Guillaume

3 replies

GiudGiud Oct 17, 2024
Collaborator

nevermind this diffs with -j 1 for my machine. We'll address this

smpeyres Oct 17, 2024
Author

A little update: I also tried to compile and run the tests for step11_action, which uses the same tests/auxkernels/corrosion.i test, and it also had EXODIFF.

GiudGiud Oct 17, 2024
Collaborator

yes any step after step 10 will incur this.
This is likely a problem due to differences in random number generation in the RandomCorrosion model between macos and linux. There should be ways to make it consistent, they just are not in there yet

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Failed tests for step10_multiapps tutorial: auxkernels/corrosion EXODIFF #28874

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 1 comment 3 replies

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Failed tests for step10_multiapps tutorial: auxkernels/corrosion EXODIFF #28874

smpeyres Oct 17, 2024

Check these boxes if you have followed the posting rules.

Issue or question about MOOSE

(Optional) code in question / simulation log / errors

Encountering Errors? Please include diagnostic output

Replies: 1 comment · 3 replies

GiudGiud Oct 17, 2024 Collaborator

GiudGiud Oct 17, 2024 Collaborator

smpeyres Oct 17, 2024 Author

GiudGiud Oct 17, 2024 Collaborator

smpeyres
Oct 17, 2024

Replies: 1 comment 3 replies

GiudGiud
Oct 17, 2024
Collaborator

GiudGiud Oct 17, 2024
Collaborator

smpeyres Oct 17, 2024
Author

GiudGiud Oct 17, 2024
Collaborator