Offline installation problem #28160

lucuo · 2024-07-17T16:02:12Z

lucuo
Jul 17, 2024

Check these boxes if you have followed the posting rules.

I have consulted the Posting Guidelines.
I have searched the Discussions Forum and MOOSE Framework Troubleshooting and have not found what I was looking for
Q&A Getting Started is the most appropriate category for my question (trouble installing, beginner user, ...)

Issue or question about MOOSE

An error is reported when running
./update_and_rebuild_petsc.sh --skip-submodule-update --with-packages-download-dir=~/projects/downloads
during offline installation. What is the reason？

=============================================================================================
=============================================================================================
               Configuring SCALAPACK with CMake; this may take several minutes
=============================================================================================
=============================================================================================
              Compiling and installing SCALAPACK; this may take several minutes
=============================================================================================
=============================================================================================
       Trying to download /home/Rookie01/projects/downloads/v7.1.4.tar.gz for STRUMPACK
=============================================================================================
=============================================================================================
               Configuring STRUMPACK with CMake; this may take several minutes
=============================================================================================
=============================================================================================
              Compiling and installing STRUMPACK; this may take several minutes
=============================================================================================

*********************************************************************************************
           UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for details):
---------------------------------------------------------------------------------------------
                               Error running make on  STRUMPACK
*********************************************************************************************

There was an error. Exiting...

here is configure.log
configure.log

(Optional) code in question / simulation log / errors

No response

Encountering Errors? Please include diagnostic output

No response

milljm · 2024-07-17T16:14:39Z

milljm
Jul 17, 2024
Maintainer

I think your installation of Fortran might be too old:

-- The CXX compiler identification is GNU 9.3.1
-- The C compiler identification is GNU 9.3.1
-- The Fortran compiler identification is GNU 4.8.5

I might be wrong about fortran being too old though. I recall GCC and Fortran versions can differ. 🤷‍♂️

Can you run the following tool:

cd moose/scripts
./diagnostics.sh

If you can, please refrain from posting images of text.

5 replies

lucuo Jul 17, 2024
Author

after ./diagnostics.sh
The output is as follows

##################################################################################################
Compiler(s) (CC CXX FC F77 F90):

CC=/mpich-3.4.2/bin/mpicc
CC -show:
gcc -I/mpich-3.4.2/include -L/mpich-3.4.2/lib -Wl,-rpath -Wl,/mpich-3.4.2/lib -Wl,--enable-new-dtags -lmpi
CC version:     gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)

CXX=/mpich-3.4.2/bin/mpicxx
CXX -show:
g++ -I/mpich-3.4.2/include -L/mpich-3.4.2/lib -lmpicxx -Wl,-rpath -Wl,/mpich-3.4.2/lib -Wl,--enable-new-dtags -lmpi
CXX version:    g++ (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)

FC=/mpich-3.4.2/bin/mpif90
FC -show:
gfortran -I/mpich-3.4.2/include -I/mpich-3.4.2/include -L/mpich-3.4.2/lib -lmpifort -Wl,-rpath -Wl,/mpich-3.4.2/lib -Wl,--enable-new-dtags -lmpi
FC version:     GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)

F77=/mpich-3.4.2/bin/mpif77
F77 -show:
gfortran -I/mpich-3.4.2/include -I/mpich-3.4.2/include -L/mpich-3.4.2/lib -lmpifort -Wl,-rpath -Wl,/mpich-3.4.2/lib -Wl,--enable-new-dtags -lmpi
F77 version:    GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)

F90=/mpich-3.4.2/bin/mpif90
F90 -show:
gfortran -I/mpich-3.4.2/include -I/mpich-3.4.2/include -L/mpich-3.4.2/lib -lmpifort -Wl,-rpath -Wl,/mpich-3.4.2/lib -Wl,--enable-new-dtags -lmpi
F90 version:    GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)

OK

##################################################################################################
Python Sanity Checks

Verify `/usr/bin/env python3 --version` (reporting as: Python 3.6.8),
matches versions for: `which python3 && which python`

Python 2.7.5
FAIL: Python 2.7.5
/usr/bin/python --version (reporting as ) != Python 3.6.8

This will likely result in the TestHarness failing. Or WASP/HIT parsing errors.

##################################################################################################
Python Modules (TestHarness, run-ability)

FAIL:    python module: `packaging` not available
WARNING: python module: `yaml` not available
WARNING: python module: `jinja2` not available

Failing Python packages will prevent you from building MOOSE.
Warning Python packages may cause miscellaneous runtime issues.

Either install the above packages, or perhaps you have yet to activate your
moose environment: `conda activate moose`.

milljm Jul 17, 2024
Maintainer

My guess is that your version of Fortran is too old to build some of the PETSc contribs. It looks like these versions should match (as they do for me):

[~] which gcc
/opt/rh/gcc-toolset-12/root/usr/bin/gcc

[~] which gfortran
/opt/rh/gcc-toolset-12/root/usr/bin/gfortran

[~] gcc --version
gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-7)
Copyright (C) 2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[~] gfortran --version
GNU Fortran (GCC) 12.2.1 20221121 (Red Hat 12.2.1-7)
Copyright (C) 2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[~]

milljm Jul 17, 2024
Maintainer

In our containers, we have to perform the following to install and make available GCC and gfortran 12.x for example:

    dnf install -y gcc-toolset-12 gcc-toolset-12-gcc gcc-toolset-12-gcc-gfortran \
        gcc-toolset-12-gcc-c++ gcc-toolset-12-gdb

    source /opt/rh/gcc-toolset-12/enable

As we can see, there is a separate package for gfortran. Perhaps all you need to do is install that one package:

dnf install gcc-toolset-9-gcc-gfortran

lucuo Jul 18, 2024
Author

I tried to skip the installation of STRUMPACK, but still got an error.

...
...
         CC arch-moose/obj/src/tao/bound/impls/blmvm/blmvm.o
         CC arch-moose/obj/src/tao/bound/impls/bqnk/bqnktl.o
         CC arch-moose/obj/src/tao/bound/impls/bqnk/bqnkls.o
         CC arch-moose/obj/src/tao/bound/impls/bqnk/bqnk.o
         CC arch-moose/obj/src/tao/bound/impls/bqnk/bqnktr.o
         CC arch-moose/obj/src/tao/bound/impls/bnk/bnls.o
         CC arch-moose/obj/src/tao/constrained/impls/ipm/pdipm.o
         CC arch-moose/obj/src/tao/bound/impls/bnk/bntr.o
         CC arch-moose/obj/src/tao/bound/impls/bnk/bntl.o
         CC arch-moose/obj/src/tao/bound/impls/bqnls/bqnls.o
         CC arch-moose/obj/src/tao/bound/impls/bnk/bnk.o
         CC arch-moose/obj/src/tao/bound/impls/tron/tron.o
         CC arch-moose/obj/src/tao/quadratic/impls/gpcg/gpcg.o
         CC arch-moose/obj/src/tao/bound/impls/bncg/bncg.o
         CC arch-moose/obj/src/tao/quadratic/impls/bqpip/bqpip.o
         CC arch-moose/obj/src/tao/util/tao_util.o
    CLINKER arch-moose/lib/libpetsc.so.3.20.3
make[3]: Leaving directory '/home/Rookie01/project2/moose/petsc'
*** Building SLEPc ***
Checking environment... done
Checking PETSc installation...
ERROR: Unable to link with PETSc
ERROR: See "arch-moose/lib/slepc/conf/configure.log" file for details
**************************ERROR*************************************
Error building SLEPc.
********************************************************************
make[2]: *** [/home/Rookie01/project2/moose/scripts/../petsc/arch-moose/lib/petsc/conf/petscrules:29: slepcbuild] Error 1
make[2]: Leaving directory '/home/Rookie01/project2/moose/petsc'
**************************ERROR*************************************
  Error during compile, check arch-moose/lib/petsc/conf/make.log
  Send it and arch-moose/lib/petsc/conf/configure.log to [email protected]
********************************************************************
make[1]: *** [all] Error 1
make: *** [all] Error 2
There was an error. Exiting...

Are these errors related?
configure.log
make.log

milljm Jul 18, 2024
Maintainer

I was about to try and reproduce this in a container, but I cannot gain a version of Gfortran that old.

I really do think you need to install the same version of Fortran, that you have for GCC.

Rocky-8:

Apptainer> gfortran --version
GNU Fortran (GCC) 8.5.0 20210514 (Red Hat 8.5.0-22)
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Yours:

Fortran compiler version: GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)

I suspect your binaries are going to be in the following locations (as I was trying to duplicate your issue:

Apptainer> which gcc gfortran
/opt/rh/gcc-toolset-12/root/usr/bin/gcc
/usr/bin/gfortran

(latest GCC 12.x sitting in correct location, while gfortran is old-system version sitting in /usr/bin)

GiudGiud · 2024-07-17T16:15:18Z

GiudGiud
Jul 17, 2024
Collaborator

Hello

Please include the diagnostics output from moose/scripts/diagnostics.sh

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Offline installation problem #28160

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 2 comments 5 replies

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

Offline installation problem #28160

lucuo Jul 17, 2024

Check these boxes if you have followed the posting rules.

Issue or question about MOOSE

(Optional) code in question / simulation log / errors

Encountering Errors? Please include diagnostic output

Replies: 2 comments · 5 replies

milljm Jul 17, 2024 Maintainer

lucuo Jul 17, 2024 Author

milljm Jul 17, 2024 Maintainer

milljm Jul 17, 2024 Maintainer

lucuo Jul 18, 2024 Author

milljm Jul 18, 2024 Maintainer

GiudGiud Jul 17, 2024 Collaborator

lucuo
Jul 17, 2024

Replies: 2 comments 5 replies

milljm
Jul 17, 2024
Maintainer

lucuo Jul 17, 2024
Author

milljm Jul 17, 2024
Maintainer

milljm Jul 17, 2024
Maintainer

lucuo Jul 18, 2024
Author

milljm Jul 18, 2024
Maintainer

GiudGiud
Jul 17, 2024
Collaborator