Add new field "srain_piezo"

[janchrillesen]

The latest software for the gateway introduces a new field "srain_piezo" - see home-assistant/core#125850

This causes Home Assistant to log the following entry

2024-09-25 14:16:29.726 WARNING (MainThread) [aioecowitt.server] Unhandled sensor type srain_piezo value 0
2024-09-25 14:17:00.726 WARNING (MainThread) [aioecowitt.server] Unhandled sensor type srain_piezo value 0

[smuliv]

same here:

Logger: aioecowitt.server
Quelle: components/ecowitt/__init__.py:30
Erstmals aufgetreten: 03:09:38 (16 Vorkommnisse)
Zuletzt protokolliert: 03:11:53

Unhandled sensor type srain_piezo value 1

found in:

    "raw": {
      "__type": "<class 'multidict._multidict.MultiDict'>",
      "repr": "<MultiDict('stationtype': 'GW2000A_V3.1.5', 'runtime': '787112', 'heap': '113008', 'dateutc': '2024-09-27 17:22:59', 'tempinf': '71.96', 'humidityin': '62', 'baromrelin': '29.911', 'baromabsin': '27.309', 'tempf': '54.14', 'humidity': '99', 'winddir': '242', 'windspeedmph': '1.12', 'windgustmph': '2.68', 'maxdailygust': '9.84', 'solarradiation': '0.00', 'uv': '0', 'rrain_piezo': '0.000', 'erain_piezo': '0.976', 'hrain_piezo': '0.000', 'drain_piezo': '0.976', 'wrain_piezo': '1.331', 'mrain_piezo': '6.106', 'yrain_piezo': '29.760', 'ws90cap_volt': '2.7', 'ws90_ver': '143', 'srain_piezo': '0', 'temp8f': '61.52', 'batt8': '0', 'wh90batt': '3.06', 'freq': '868M', 'model': 'GW2000A', 'interval': '8')>"
    },

[smuliv]

if someone is interested in creating a pr here are the needed changes.
i will post this also in home-assistant/core#125850, because the integration needs a change too.

in aioecowitt lib:

calc.py:

***************
*** 151,156 ****
--- 151,158 ----
      if "yrain_piezo" in data:
          data["yrain_piezo"] = float(data["yrain_piezo"])
          data["yrain_piezomm"] = round(data["yrain_piezo"] * in_mm, 1)
+     if "srain_piezo" in data:
+         data["srain_piezo"] = int(data["srain_piezo"])
  
      # Pressure
      if "baromrelin" in data:

sensor.py:

***************
*** 77,82 ****
--- 77,83 ----
      LUX = 28
      PERCENTAGE = 29
      SOIL_RAWADC = 30
+     RAIN_STATE = 31
  
  
  @dataclass
***************
*** 442,447 ****
--- 443,449 ----
      "yrain_piezo": EcoWittMapping(
          "Yearly Rain Rate Piezo", EcoWittSensorTypes.RAIN_COUNT_INCHES
      ),
+     "srain_piezo": EcoWittMapping("Rain State Piezo", EcoWittSensorTypes.RAIN_STATE),
      "rrain_piezomm": EcoWittMapping("Rain Rate Piezo", EcoWittSensorTypes.RAIN_RATE_MM),
      "erain_piezomm": EcoWittMapping(
          "Event Rain Rate Piezo", EcoWittSensorTypes.RAIN_COUNT_MM

in ecowitt integration:

binary_sensor.py:

***************
*** 26,31 ****
--- 26,34 ----
          device_class=BinarySensorDeviceClass.BATTERY,
          entity_category=EntityCategory.DIAGNOSTIC,
      ),
+     EcoWittSensorTypes.RAIN_STATE: BinarySensorEntityDescription(
+         key="RAIN_STATE", device_class=BinarySensorDeviceClass.MOISTURE
+     ),
  }

[de-Techneut]

Would like to know what the state is of this issue.

My log is still getting filled with this alarm.

Logger: aioecowitt.server
Source: components/ecowitt/__init__.py:30
First occurred: 14:52:58 (1448 occurrences)
Last logged: 14:52:58

Unhandled sensor type srain_piezo value 0

[mehuman]

Is this related to the binary Rain sensor I'm seeing? Was looking through the code trying to find the logic since my sensor has been in the state of on for 14 hours.

[GeoBau]

2025-01-22 19:04:46.475 WARNING (MainThread) [aioecowitt.server] Unhandled sensor type srain_piezo value 0
I receive this message every 10 mintes ...
would be nice if this issue would be isolved!