Skip to content

Latest commit

 

History

History
100 lines (58 loc) · 3.15 KB

APPSTORE.md

File metadata and controls

100 lines (58 loc) · 3.15 KB

SSBv1 Support for Homey

This Project allows Control of SSBv1 devices via Homey over TCP/IP

Requirements

  • openWebif needs to be available on the device
  • Setup of SSBv1 App via Homey required. Start Homey App, open the More section, select Apps Menu, open SSBv1 entry and Click on "Configure app"

Support Overview

[ ] = not yet supported

[x] = support available

when / trigger flowcards

[ ] polling required, therefor currently not decided. If you like to put in arguments, visit Athom Community

and / condition flowcards

[ ] Power is ON

[ ] Power is OFF

[ ] Radio mode is used

[ ] TV mode is used

[ ] ...to be continued if you have ideas, visit Athom Community and let me know

then / action flowcards

[x] deep standby mode -> ATTENTION: see below

[x] reboot SSBv1 software

[x] reboot receiver

[x] send command as ID (see below for Info)

[x] send message -> ATTENTION: see below

[x] standby mode

[x] standby wake

[x] Volume mute

[x] Volume set (0% - 100%)

[x] Volume unmute

[ ] ...to be continued if you have ideas, visit Athom Community and let me know

Supported Languages

[ ] dutch Contribute here or file a pull request on GitHub

[x] english

[x] german

deep standby mode

WARNING: After this flowcard is executed you can't control the box over the Network Interface anymore!

Messages

During the Input you need to make sure you follow these Format: Type|Timeout|Message inbetween the different Sections no Spaces are required. Here are the different Supported Variables: Type:

  • 0 = Yes / No (currently only Display, no action yet implemented)
  • 1 = Info Message
  • 2 = Plain Message
  • 3 = Attention Message Timeout:
  • set it to 0 to be endless displayed or Provide Time in seconds Message:
  • Type your Text here, to make a new line use \n in the Text without a Space afterwards.

For Supported Devices check the following

Due to limited access to all SSBv1 enabled devices, i was only able to test the functions at an Dreambox 800HDse and a few less on an VU+ duo2, if any Issues are observed, please file an Issue on GitHub or Post to the Athom Community Forum Topic.

  1. Check Google Spreadsheet: Google Spreadsheet Green = Fully Supported
    empty Green = Not Programmed in this Device
  2. Pictures of the Boxes can be found here: OpenWebif Box Pictures
  3. Pictures of the Remotes can be found here: OpenWebif Remote Pictures

.