- Introduction
Here you will find performance measurements of the plipbox software with a specific board.
For more details on how to perform the tests see the firmware documentation.
- plipbox console:
- Test Mode 4
- Activate Auto Mode a
- Wait approx. 60s
- Deactivate Auto Mode a
- Show statistics s
- plipbox console:
- Test Mode 3
- PC
- pio_test -c 1000
- plipbox console:
- Test Mode 2
- Parameter tm == 0
- PC
- pio_test -c 1000
- plipbox console:
- Test Mode 2
- Parameter tm == 1
- PC
- pio_test -c 1000
- plipbox console:
- Mode 1
- PC
- pio_test -c 1000 -a amiga_ip
- Version 0.6
- Plipbox:
- Sofware: 0.6
- Hardware: crasbe's plipbox (ATmega328p)
- Amiga:
- dev_test 0.6, udp_test 0.6, Roadshow 1.11
- A500 + ACA500 + ACA 1230/33
cnt bytes err drop rate
033F 00133296 0000 0000 0234.36 KB/s rx plipbox
033F 00133296 0000 0000 0234.80 KB/s tx
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 1000 delay= 0 verbose= False
@1000: d= 8.92 ms v=314.05 KB/s
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 10 delay= 0 verbose= False
@10: d= 22.00 ms v=127.27 KB/s
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 100 delay= 0 verbose= False
@100: d= 22.64 ms v=123.68 KB/s
ip= 192.168.2.42 tgt_port= 6800 src_port= 6800 data_size 1400 count= 1000 delay= 0 verbose= False
@1000: d= 24.48 ms v=114.38 KB/s
- Plipbox:
- Sofware: 0.6
- Hardware: crasbe's plipbox (ATmega328p)
- Amiga:
- dev_test 0.6, udp_test 0.6, Roadshow 1.11
- A500 + ACA500
cnt bytes err drop rate
056F 00202276 0000 0000 0175.39 KB/s rx plipbox
056E 00201C8C 0000 0000 0201.11 KB/s tx
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 1000 delay= 0 verbose= False
@1000: d= 8.91 ms v=314.27 KB/s
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 100 delay= 0 verbose= False
@100: d= 27.28 ms v=102.65 KB/s
ip= 192.168.2.222 tgt_port= 6800 src_port= 6800 data_size 1400 count= 100 delay= 0 verbose= False
@100: d= 30.15 ms v= 92.88 KB/s
ip= 192.168.2.42 tgt_port= 6800 src_port= 6800 data_size 1400 count= 1000 delay= 0 verbose= False
@1000: d= 38.99 ms v= 71.81 KB/s
EOF