README.md

VBANDeck

Version 1.0.2

VBAN Remote Plugin for the Elgato StreamDeck

How to use

For help with the VoiceMeeter scripting language, please refer to this Document, chapter "MACRO Buttons > VoiceMeeter Remote Requests".

VoiceMeeter Setup

• You need at least VoiceMeeter Banana to use this plugin.
• In the VBAN Screen;
  • Turn VBAN On using the switch in the top-left corner
  • Turn the Remoting stream on, its the last entry in the "Incoming Streams" area
    • Default name: Command1
    • This name must match your StreamDeck configuration
  • The "IP Address From" field may be left empty, for Command-streams this is ignored T

The VBAN screen should look something like this:

Simple Script

A Simple Script Button will send a static script every time it is pressed.

• The IP Address is the Address of the Computer that VoiceMeeter runs on
  • This is shown in the VBAN configuration screen within VoiceMeeeter
• The Port is the UDP Port configured in the VBAN configuration screen
• The StreamName must match the Stream Name of the Incoming Remoting Stream in the VoiceMeeter instance

Here is a configuration example for a Simple Script Button that will disable the first hardware-output bus:

Toggle Button / Double State Button

The Double State Button has two states; enabled and disabled.

It sends one static script every time the state changes.

• The IP Address is the Address of the Computer that VoiceMeeter runs on
  • This is shown in the VBAN configuration screen within VoiceMeeeter
• The Port is the UDP Port configured in the VBAN configuration screen
• The StreamName must match the Stream Name of the Incoming Remoting Stream in the VoiceMeeter instance
• The "Request for Trigger IN" is the Script sent when the button becomes enabled
• The "Request for Trigger OUT" is the Script sent when the button becomes disabled

Here is a configuration example for a Double State Button that toggles the first hardware-input strip: