| Amount | Description | Package | Part | URL |
|---|---|---|---|---|
| 2 | Capacitor 10 pF | C1206 | C3, C4 | Reichelt |
| 3 | Capacitor 100 nF | C1206 | C1, C5, C6 | Reichelt |
| 1 | Capacitor 1000 uF / 16 V | E5-8.5 | C2 | Reichelt |
| 4 | Resistor 100 Ohm | R1206 | R6, R7, R8, R9 | Reichelt |
| 1 | Resistor 1 kOhm | R1206 | R4 | Reichelt |
| 1 | Resistor 1.2 kOhm | R1206 | R2 | Reichelt |
| 1 | Resistor 10 kOhm | R1206 | R3 | Reichelt |
| 1 | Resistor 100 kOhm | R1206 | R1 | Reichelt |
| 1 | Resistor 8.2 MOhm | R1206 | R5 | Reichelt |
| 1 | Harting connector | ML10 | CON1 | Reichelt |
| 1 | ESD suppressor CDSOD323-T05C | SOD-323 | D1 | Conrad, Farnell |
| 1 | Micro fuse block, 4A slow | OMNI-BLOK | F1 | Reichelt, Farnell |
| 1 | ESP32-DEVKIT V1 | - | ESP32-DEVKITV1 | Ebay |
| 1 | N-channel mosfet BSS138 | SOT23 | Q1 | Reichelt, Farnell |
| 1 | 32.768 kHz crystal | TC26V | Q2 | Reichelt, Farnell |
| 1 | P-channel mosfet STD26P3LLH6 | TO252 | U1 | Reichelt, Farnell |
| 6 | Wago clamp 2 | W237-102 | X1, X2, X3, X4, X5, X6 | Reichelt, Farnell |
| 1 | Wago clamp 1 | W237-103 | X2 | Reichelt |
| 1 | WS2812B 5050 8x32 RGB Flexible LED Panel Matrix | - | - | Ebay |
| 1 | Power supply 5 V / 5 A (4 A would be enough) | - | - | Reichelt |
| 1 | Power cable | - | - | Reichelt |
| 1 | Power supply plug | - | - | Reichelt |
Note, X2 is a composition of Wago clamp 1 and 2.
If you have further ideas or you found some bugs, great! Create a issue or if you are able and willing to fix it by yourself, clone the repository and create a pull request.
The whole source code is published under the MIT license.