SHT20 component available ?

[MarkEvens]

In this components list sht20 supported component available ? If yes than how ?
Thanks in advance.

[MarkEvens]

i am facing issue that I am getting humidity but temperature read has timeout error

I (0) cpu_start: App cpu up.
I (248) heap_init: Initializing. RAM available for dynamic allocation:
I (255) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (261) heap_init: At 3FFB28C8 len 0002D738 (181 KiB): DRAM
I (267) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (273) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (280) heap_init: At 4008B254 len 00014DAC (83 KiB): IRAM
I (286) cpu_start: Pro cpu start user code
I (304) spi_flash: detected chip: generic
I (305) spi_flash: flash io: dio
I (305) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
E (1050) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.67
E (3150) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.67
E (5250) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.70
E (7350) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.67
E (9450) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.67
E (11550) i2cdev: Could not read from device [0x40 at 0]: 263
Could not measure temperature: 263 (ESP_ERR_TIMEOUT)
Humidity: 66.64

[MarkEvens]

My problem solved by increment delay at below.

#define DELAY_MS 100  // fixed delay

[UncleRus]

Fixed in master, thank you!