Replies: 7 comments 44 replies
-
|
Please share a picture of your units screen in current state. |
Beta Was this translation helpful? Give feedback.
-
|
I think it works, putty is writing this in loop: |
Beta Was this translation helpful? Give feedback.
-
|
Look in mibwiki for enter IPL |
Beta Was this translation helpful? Give feedback.
-
https://mibwiki.one/doc/enter-ipl-jnQb14ZDOs I've already tried this 😬 nothing happened. I ordered a UART board, I will pick it up tomorrow and see if it changes anything. Also, is it normal that the fan turns on and off and the led lights in the front cover are blinking? |
Beta Was this translation helpful? Give feedback.
-
|
Let's try again after your UART arrived. However, from your log it looks like that really most of NOR is 0ed at the moment. |
Beta Was this translation helpful? Give feedback.
-
|
I have now gotten the UART and made it work with PC/MMI: Putty does this, and I cant seem to get it to break.. |
Beta Was this translation helpful? Give feedback.
-
|
So I've manged to get the break function to work when using Tera Term instead of Putty - putty was non responding to key strokes. The message: BREAK detected - press any key to stop the ipl within 5000ms! comes up, but the loop continues and does not register any further keystrokes. I will try to connect some of it back to the car while UART is still connected and see if that changes anything. It's like the module doesn't start up correctly, the fan is in an on/off loop, as well as the LED light in the front of the MMI module, it's blinking. If that doesn't do anything I guess I'm screwed! 😒 |
Beta Was this translation helpful? Give feedback.
-
|
nt -uw /net/mmx/fs/sda0 /net/mmx/fs/sda0 > ModPack: eso fw RCC: >FRAMEWORK_VERSION=5.45.0 MIB2MAIN I183 CI62< /usr/bin/modifyPackage.sh[175]: [: 100: unexpected operator/operand |
Beta Was this translation helpful? Give feedback.
-
|
total 8388612 |
Beta Was this translation helpful? Give feedback.
-
|
is this right? |
Beta Was this translation helpful? Give feedback.
-
|
Get the file which should have been created on SD |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Hi @Ildpayne. Have you managed to solve the problem ever? I think, I have a very similar issue. After installing MI, applying the PATCH, and restarting, the MMI freezes with the last picture on it what it had before the installation. It doesn't react to any button and it reboots after about 1 minute. |
Beta Was this translation helpful? Give feedback.
-
|
@harman-f I have a few questions in case I try to do the recovery from the wiki you mentioned above:
|
Beta Was this translation helpful? Give feedback.
-
|
Maybe one twist in the story is, that I install |
Beta Was this translation helpful? Give feedback.
-
|
Unfortunately I wasn't able to fix it, the unit was dead, it wouldn't take new data in, it was indeed bricked. I was lucky enough to find a new unit and a guy who could code it to my car, so a 1000$ fix for me, but everything ended up working and I got all licences unlocked that way 😅 Audi wanted 7200$ for a new unit and on top of that, they'd add labour hours, so I got off easy I reckon and I've learned a few things in the process. |
Beta Was this translation helpful? Give feedback.
-
|
Update for those who got here from google. I managed to flash back the old (K3346) official firmware (RCC) connecting to the RCC UART with a Raspberry PI using Minicom and following this guide. Note that you have quite a short time to send that sending that break when the MIB is booting, if you miss that tiny window, you better reset the MIB and try again. Also after you logged in, you better enable dev mode, otherwise the device reboots after 30 seconds and it's a pain in the ass working with it. |
Beta Was this translation helpful? Give feedback.
-
|
Looks like the |
Beta Was this translation helpful? Give feedback.
-
|
Hello MMX-flash----> add FECs to FEC File from /net/rcc/mnt/efs-persist/FEC copy FEC file from /patches/MHI2Q_ER_AUG22_P5092_MU1329_PATCH... -> done :-) |
Beta Was this translation helpful? Give feedback.
-
|
Collegues - do you try this solving https://github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/wiki/ExceptionList-BUG?: "Hence, you still should have your D-Link USB-Ethernet adapter flying around!? Unit is still accessible via telnet and uart. |
Beta Was this translation helpful? Give feedback.
-
|
HOW I CAN CHECK it before push "activation patch_unit_aio>PATCH NOW: Patch | add FECs | enable CP/AA coding | and more" in GEM M.i.b? |
Beta Was this translation helpful? Give feedback.
-
|
MU1329-JTB-07427.02.191173024E-ifs-root-part2-0x00failed-C005F400 |
Beta Was this translation helpful? Give feedback.
-
Hi!
I've just installed the MIB on my car and then proceeded to flash with the MHI2Q_ER_AUG22_P3638_MU0917 patch, which matched mine. Everything seem to go well and then it rebooted.
Now the MMI starts on the SD card media page and is locked - no buttons or controls working - I can hardreset it, but the same thing happens, it goes to the SD card menu and I can't do anything from there.
What happened and how can I fix it? I made a backup before doing anything.
Thank you in advance.
Here is the log of the process:
Beta Was this translation helpful? Give feedback.
All reactions