ncp-gp-LDMG21-92.s37 = MG21 NCP with GP and SW folw control and NVM3 EZSP 6.9.2.0.
ncp-gp-LDMG21-10.s37 = MG21 NCP with GP and SW folw control and NVM3 EZSP 6.10.0.0.
| Configuration Parameter | Value | Pin/Pad |
|---|---|---|
| Module | tuya | ZS3L |
| Part | EFR32MG21A020F768IM32-B | |
| Version | EZSP 6.9.2.0 / 6.10.0.0 | |
| Type | NCP-NVM3-GP-SW / NCP-NVM3-GP-SW-10 | |
| Status | Working / Untested | |
| Address Table Size | 8 / 32 | ST / NT |
| Child Table Size | 32 | ST |
| Source Routes | 7 / 100 | ST / NT |
| Green Power Proxy Table Size | 100 | ST |
| Green Power Sink Table Size | 100 | ST |
| NVM3 Flash Pages | 12 | NS |
| Link Key Table Size | 127 | NS |
| CTUNE value | -1 | ST |
| PTI | Enabled | |
| VUART | Enabled | |
| VCC | 3.3 V | 1 |
| GND | GND | 2 |
| RX NCP / VCom | PA06 | 3 |
| TX NCP / VCom | PA05 | 4 |
| PTI Frame | PD01 | 5 |
| PTI Data | PD00 | 6 |
| SWCLK | PA01 | 7 |
| SWDIO | PA02 | 8 |
| SWO | PA03 | 9 |
| Reset | Rest | 10 |
| BLP | PC02 | - |
First out :-))
EmberZNet version: 6.10.0.0 build 169
Addnig one working rcp for the ZS3L.
Pinout is standard tuya so RX = PA06 and TX = PA05.
Use socket://192.168.2.64:9999 (with your HAS IP address) and 115200 baud in the addon.
HA is up and running with one
Device info
LEPTITER Recessed spot light
by IKEA of Sweden
Mor testing is comming and if going well all my test networks is being moved if all devices is liking the new coordinator.
Little OT info (little patched):
IPv6:LocalAddress
fd11:XX:0:0:8cc0:XXXX:6685:7f35
IPv6:MeshLocalAddress
fdce:XXXX:604a:XXXX:2706:XXXX:c718:62ec
IPv6:MeshLocalPrefix
fdce:XXXX:604a:XXXX:
Network:Name
OpenThreadMWTest
OpenThread:Version
OPENTHREAD/9e70b13f-dirty; POSIX; Feb 24 2022 14:27:39
RCP:Version
SL-OPENTHREAD/2.0.1.0_GitHub-55af6ce2c; EFR32; Mar 6 2022 11:11:28
Sadly my nighburs dont have any OT devices online so im being very alone ;-((
RCP 4.2.0.0 updated in Zip file with bootloader. The 23 HW is working OK for my with the latest HA addon and ZHA.
MG21LD-ot-cli-ftd-420.s37 is one Open Thread Fullfuture Device with CLI (dont using bootloader so only flashing it).
Have 115200 HW as comport and have most function i can finded enabled so can play around in the thread mesh network with it.
My 3 Billys RCP have getting company:-)))