fluidd.cfg

# [virtual_sdcard]
# path: /home/mks/gcode_files
#
# [pause_resume]
#
# [display_status]
#
# [gcode_macro CANCEL_PRINT]
# description: Cancel the actual running print
# rename_existing: CANCEL_PRINT_BASE
# gcode:
# # TURN_OFF_HEATERS
#   CANCEL_PRINT_BASE
#
# [gcode_macro PAUSE]
# description: Pause the actual running print
# rename_existing: PAUSE_BASE
# # change this if you need more or less extrusion
# variable_extrude: 1.0
# gcode:
#   ##### read E from pause macro #####
#   {% set E = printer["gcode_macro PAUSE"].extrude|float %}
#   ##### set park positon for x and y #####
#   # default is your max posion from your printer.cfg
#   {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
#   {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
#   ##### calculate save lift position #####
#   {% set max_z = printer.toolhead.axis_maximum.z|float %}
#   {% set act_z = printer.toolhead.position.z|float %}
#   {% if act_z < (max_z - 2.0) %}
#       {% set z_safe = 2.0 %}
#   {% else %}
#       {% set z_safe = max_z - act_z %}
#   {% endif %}
#   ##### end of definitions #####
#   PAUSE_BASE
#   G91
#   {% if printer.extruder.can_extrude|lower == 'true' %}
#       G1 E-{E} F2100
#   {% else %}
#       {action_respond_info("Extruder not hot enough")}
#   {% endif %}
#   {% if "xyz" in printer.toolhead.homed_axes %}
#       G1 Z{z_safe} F900
#       G90
#       G1 X{x_park} Y{y_park} F6000
#   {% else %}
#       {action_respond_info("Printer not homed")}
#   {% endif %}
#
# [gcode_macro RESUME]
# description: Resume the actual running print
# rename_existing: RESUME_BASE
# gcode:
#     ##### read E from pause macro #####
#     {% set E = printer["gcode_macro PAUSE"].extrude|float %}
#     #### get VELOCITY parameter if specified ####
#     {% if 'VELOCITY' in params|upper %}
#       {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
#     {%else %}
#       {% set get_params = "" %}
#     {% endif %}
#     ##### end of definitions #####
#     {% if printer.extruder.can_extrude|lower == 'true' %}
#       G91
#       G1 E{E} F2100
#     {% else %}
#       {action_respond_info("Extruder not hot enough")}
#     {% endif %}
#     RESUME_BASE {get_params}